Become a Site Supporter and Never see Ads again!

Author Topic: Portable headphone amp for pcm10  (Read 2804 times)

0 Members and 1 Guest are viewing this topic.

Offline MBHOTAPER

  • Trade Count: (6)
  • Taperssection Member
  • ***
  • Posts: 754
  • Gender: Male
  • Jam Bands Rock!
Portable headphone amp for pcm10
« on: December 09, 2017, 09:55:21 PM »
Bought an ebay pcm10 for steathing. Thanks jb63 for sending me the accessories he had in his closet ebay purchase was for the unit only.
It appears that the cmoy does not have the best op amps or rails for our use but bioscience geek on ebay does some interesting customized options. The objective 2 is described as much better unit with increased efficiencies and gain selection switch. Is the objective 2 realistically a decent field unit for our uses? The best one is 18v (2x9v rechargeable) with gain switch 2.5 3.3, 6.5 or 8x.
 
« Last Edit: December 10, 2017, 06:46:19 PM by MBHOTAPER »

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3528
Re: Portable headphone amp for pcm10
« Reply #1 on: December 10, 2017, 06:58:47 PM »
It depends a lot on what headphones you're using.  Maybe just get an easier to drive pair of headphones?
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

 

RSS | Mobile
Page created in 0.115 seconds with 30 queries.
© 2002-2024 Taperssection.com
Powered by SMF