Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Sony PCM 10 - Plug in power  (Read 5754 times)

0 Members and 1 Guest are viewing this topic.

Offline tomy01

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 65
Sony PCM 10 - Plug in power
« on: September 09, 2018, 07:17:37 PM »
I just picked up a used SONY PCM-M10, Ugly Battery Box and some CA-11's and I usually plug the CA-11's in the microphone jack.  The question I have -  since I am using an Ugly Battery Box does it matter if I set the "Plug In Power" to ON or OFF?

Thanks
Logged

Offline vanark

  • TDS
  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 8950
  • If you ain't right, you better get right!
    • The Mudboy Grotto - North Mississippi Allstar fan site
Sony PCM 10 - Plug in power
« Reply #1 on: September 10, 2018, 06:42:28 AM »
Turn plug in power off if you are using a battery box.
Logged
If you have a problem relating to the Live Music Archive (http://www.archive.org/details/etree) please send an e-mail to us admins at LMA(AT)archive(DOT)org or post in the LMA thread here and we'll get on it. LMA FAQ: https://help.archive.org/help/live-music-archive-etree-org/

Link to LMA Recordings

Link to Team Dirty South Recordings on the LMA

Mics: Microtech Gefell M21 (with Nbob actives) | Church Audio CA-11 (cards) (with CA UBB)
Pres: babynbox
Recorders: Tascam DR-60D | Tascam DR-40 | Sony PCM-A10 | Edirol R-4
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.03 seconds with 25 queries.
© 2002-2026 Taperssection.com
Powered by SMF