Become a Site Supporter and Never see Ads again!

Author Topic: Thicker heatshrink?  (Read 1493 times)

0 Members and 1 Guest are viewing this topic.

Offline voltronic

  • Trade Count: (34)
  • Needs to get out more...
  • *****
  • Posts: 3157
Thicker heatshrink?
« on: December 26, 2018, 08:46:43 AM »
I recently did a cable build, and the heatshrink I ordered from Redco turned out to be quite thin once installed.  Does anyone know who sells the nice thick stuff?  Parts Express?  Markertek?
DPA 4061 | Line Audio CM3 | Naiant X-Q | AT 853  //  Naiant PFAs | Shure FP24  //  Zoom F6 | Sony PCM-M10
MOTU M2 // KRK Rokit RP5 // Sennheiser HD 650

Team Line Audio

Offline lsd2525

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 2835
  • Gender: Male
  • Eschew obfuscation
Re: Thicker heatshrink?
« Reply #1 on: December 26, 2018, 11:57:49 AM »
I recently did a cable build, and the heatshrink I ordered from Redco turned out to be quite thin once installed.  Does anyone know who sells the nice thick stuff?  Parts Express?  Markertek?

I've never used it for mic cables, but if you have one handy, git on down to Harbor Freight Tool. Various sizes, and IIRC, pretty thick stuff
Mics: SKM184's; ADK A51s; AT4041; Line CM3; Superlux S502; CK91 active w/homebrew BB; AT853; Naiant X-X; Nak 300's
Recorders: M10; DR-60D; DR-701D

Offline voltronic

  • Trade Count: (34)
  • Needs to get out more...
  • *****
  • Posts: 3157
Re: Thicker heatshrink?
« Reply #2 on: December 26, 2018, 03:17:05 PM »
I recently did a cable build, and the heatshrink I ordered from Redco turned out to be quite thin once installed.  Does anyone know who sells the nice thick stuff?  Parts Express?  Markertek?

I've never used it for mic cables, but if you have one handy, git on down to Harbor Freight Tool. Various sizes, and IIRC, pretty thick stuff

I do have one nearby.  I'll check out their stuff - thanks!
DPA 4061 | Line Audio CM3 | Naiant X-Q | AT 853  //  Naiant PFAs | Shure FP24  //  Zoom F6 | Sony PCM-M10
MOTU M2 // KRK Rokit RP5 // Sennheiser HD 650

Team Line Audio

Offline lsd2525

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 2835
  • Gender: Male
  • Eschew obfuscation
Re: Thicker heatshrink?
« Reply #3 on: December 26, 2018, 03:23:52 PM »
I recently did a cable build, and the heatshrink I ordered from Redco turned out to be quite thin once installed.  Does anyone know who sells the nice thick stuff?  Parts Express?  Markertek?

I've never used it for mic cables, but if you have one handy, git on down to Harbor Freight Tool. Various sizes, and IIRC, pretty thick stuff

I do have one nearby.  I'll check out their stuff - thanks!

Hope I'm not sending you on a wild goose chase. It's certainly cheap enough. Hell, buy a pack for $1 and get one of those free flashlights. I always keep a couple in my rig bag. Good luck!!!
Mics: SKM184's; ADK A51s; AT4041; Line CM3; Superlux S502; CK91 active w/homebrew BB; AT853; Naiant X-X; Nak 300's
Recorders: M10; DR-60D; DR-701D

ThePiedPiper

  • Guest
  • Trade Count: (0)
Re: Thicker heatshrink?
« Reply #4 on: December 26, 2018, 06:48:48 PM »
I recently did a cable build, and the heatshrink I ordered from Redco turned out to be quite thin once installed.  Does anyone know who sells the nice thick stuff?  Parts Express?  Markertek?

I've never used it for mic cables, but if you have one handy, git on down to Harbor Freight Tool. Various sizes, and IIRC, pretty thick stuff

That's where we get ours from. Nice assortment and selection of sizes and colors. Good sturdy stuff with a great shrink % as well.

 

RSS | Mobile
Page created in 0.035 seconds with 46 queries.
© 2002-2020 Taperssection.com
Powered by SMF