Become a Site Supporter and Never see Ads again!

Author Topic: External battery  (Read 7631 times)

0 Members and 1 Guest are viewing this topic.

Offline Ekoostikshawn

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 3
External battery
« on: January 08, 2021, 08:44:27 AM »
Looking for a battery to power my dr-100mkii with phantom power on. Saw this in another thread but started a new topic as the thread was old. Will be going to a small fest in Florida next month and won’t have access to power and would like to tape as many sets as possible. Can anyone confirm that this will power my dr-100 using the 5v output? Any suggestions of something that would last longer in the same price range?

https://www.amazon.com/gp/product/B00YP823NA

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: External battery
« Reply #1 on: January 08, 2021, 06:55:01 PM »
thats a monster battery for a DR100

try this

https://www.amazon.com/Anker-Ultra-Compact-High-Speed-VoltageBoost-Technology/dp/B07QXV6N1B

should last all day

Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

Offline Ekoostikshawn

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 3
Re: External battery
« Reply #2 on: January 09, 2021, 12:17:17 PM »
thats a monster battery for a DR100

try this

https://www.amazon.com/Anker-Ultra-Compact-High-Speed-VoltageBoost-Technology/dp/B07QXV6N1B

should last all day



Thanks, will look at that. I was under the impression that I would need something bigger since I will be using phantom power

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: External battery
« Reply #3 on: January 09, 2021, 06:22:33 PM »
nah, while the voltage is relatively high, most mics use only 2-10mA so your net draw is only on the order of 100 mW for a pair of mics
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

Offline rumbleseat

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 103
  • Gender: Male
    • Sonicsational Audio
Re: External battery
« Reply #4 on: January 15, 2021, 10:28:29 AM »
Your choice of battery depends on a couple of factors.

Let's start with run-time.  Your DR100-MKII claims 4 watts maximum drain on the battery, but also says that phantom power will drain the batteries much more quickly.  None of the run-time examples in the manual include phantom power.  The manual for the MKIII says 7.5 watt maximum drain and shows that phantom cuts the run-time about in half.   Let's go with 7.5 watts - That gives the Anker 10,000 mAH x 3.7 volts = 37 watt hours about 5 hours of run time (37 Wh/7.5 W = 4.9 hours).  The Max Oak power pack, with 185 Wh of power will go for almost 25 hours (185/7.5).

Second consideration is whether you're driving or flying.  The Max Oak power pack can not go on a commercial passenger flight.
The FAA says 0-100 Wh is fine.  101-160 Wh requires pre-approval from the airline (some airline web sites state that they're OK with these and you don't need pre-approval)  You can take up to 2 units.  Above 160 Wh is No Fly.
Power packs must go in your carry-on luggage.  If it catches on fire, pour plain water on it.
https://www.faa.gov/hazmat/packsafe/more_info/?hazmat=7

Yes, the Max Oak 2.1A 5V USB outlets will power the DR-100MKII if you get the right USB-to-5V-plug cable.  There are a couple of 5V-plug sizes and I don't know which one off the top of my head.  Shout if you need help.

 

« Last Edit: January 15, 2021, 11:14:43 AM by rumbleseat »
AKG C480B CK61 cards or AKG C568EB or Church CA-11 cards >  Canare L-4E6S with Neutrik EMC > Tascam DR-680 MKII or DR-44WL > memories

Offline one8ung

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 300
  • Gender: Male
Re: External battery
« Reply #5 on: July 18, 2021, 01:13:26 PM »
My manual from the Tascam DR-2d says the power consumption is 0,9 W.

Can I make the math for a powerbank from 2,600 mAH x 3,7 volts = 9,62 watt (=9,62 Wh/0,9 W = 10,68 hours)?
Mics: DPA 4061 Power: CA-UBB Recorders: Tascam DR-2d (4x)

IEM Receivers: Sennheiser EK 2000 IEM-AW, Sennheiser EK 2000 IEM-BW, Sennheiser EK 2000 IEM-GW, Sennheiser EK IEM G4-B, Shure P10R G10, Shure P10R J8, Shure P10R L8, Wisycom MPR50-IEM

Mobile Interface: Røde AI-Micro (2x)

 

RSS | Mobile
Page created in 0.034 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF