Glitches in soundboard feed, any chance for recovery?

[Dan33185]

I recently recorded Wayne Hancock and was able to get a feed off the soundboard. I used 1/4" > Tascam DR-60D, and I noticed in post there were a lot of little glitches throughout the recording. I use the "click/pop eliminator" in Audition, but that doesn't seem to have helped it much. I'm guessing the recording is a lost cause, but I figured I'd ask here to see if anyone had any ideas. Sample below:

https://drive.google.com/file/d/1rliQaHDekQwByq3oscd-CUuMn-c6pQjD/view?usp=sharing

[grawk]

https://drive.google.com/file/d/1nSTVHxsz3xHDYhtCbCb6aQIF2cYky3JV/view?usp=drive_link

that was a quick hit with spectral repair in rx 10

[Dan33185]

https://drive.google.com/file/d/1nSTVHxsz3xHDYhtCbCb6aQIF2cYky3JV/view?usp=drive_link

that was a quick hit with spectral repair in rx 10

Didn't even think of using that  Thanks for doing that, definitely gives me hope I can salvage it.

[grawk]

just select as close to the noise as you can

[adrianf74]

just select as close to the noise as you can

Exactly this.  RX does a great job in fixing a lot of lost cause recordings.

[Dan33185]

just select as close to the noise as you can

Definitely...makes for tedious work but worth it in the end, it's already sounding much better. A few spots where there will be some weird distortion, but much better than the jarring sounds it was making before.