Become a Site Supporter and Never see Ads again!

Author Topic: Taping from radio??  (Read 3347 times)

0 Members and 1 Guest are viewing this topic.

Offline redbook

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 271
  • Gender: Male
  • I'm a llama!
Taping from radio??
« on: June 30, 2004, 07:46:10 AM »
Hi there,

I would like to tape a show that is going to be broadcasted on a local FM station.
Which would be the best way to get a perfect recording?

I have a FM tuner, a D8 DAT, a PCTV card with FM tuner.... what's the best way to do it?
FM TUNER > DAT? PCTV > WAV?

Any help very appreciated.
Thanks!

Offline Fatah Ruark (aka MIKE B)

  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 10060
  • Gender: Male
  • I dream in beige.
    • sloppy.art.ink
Re: Taping from radio??
« Reply #1 on: June 30, 2004, 12:02:48 PM »
Well if you do PC>WAV you don't have to do any transfer if you want to burn it to CD or share it. But a computer is less reliable than DAT.

Why not do both? If there's a problem with the computer you can use the DAT as a backup.

As far as quality goes they both should be the same. You could tape 24bit with the PC but I'm not sure that would help with the source being FM.

Does that sound good, folks?

MIKE B
||| MICS: DPA 4022 | DPA 4080 | Nevaton MCE400 | Sennheiser Ambeo Headset |||
||| PREAMPS: DPA d:vice|||
||| DECKS: Sound Devices MixPre6 | Zoom F3 | iPod Touch 32GB |||
|||Concert History || LMA Recordings || Live YouTube |||

spreadheadtom

  • Guest
  • Trade Count: (0)
Re: Taping from radio??
« Reply #2 on: June 30, 2004, 04:56:33 PM »
I would definately run both

Offline firmdragon

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1280
  • Gender: Male
    • taping blog
Re: Taping from radio??
« Reply #3 on: June 30, 2004, 09:56:58 PM »
while on topic..

someone once told me you could technically record FMs at 32khz w/o loss in fidelity/quality/whatever because FM is in that sample rate range.  is this correct?

zowie

  • Guest
  • Trade Count: (0)
Re: Taping from radio??
« Reply #4 on: July 01, 2004, 01:16:35 PM »
while on topic..

someone once told me you could technically record FMs at 32khz w/o loss in fidelity/quality/whatever because FM is in that sample rate range.  is this correct?

No.

Offline Cooker

  • Local Crew
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 8720
  • Gender: Male
Re: Taping from radio??
« Reply #5 on: July 02, 2004, 09:10:10 AM »
i believe 32k offers less dynamic range than FM. i think at one time it was referred to as FM quality because that's what it's closest to but FM exceeds it somewhat.  i see no reason to record at 48K though - just gonna waste time resampling something for nothing - do 44.1 .

 

RSS | Mobile
Page created in 0.075 seconds with 29 queries.
© 2002-2025 Taperssection.com
Powered by SMF