So, I'm expecting my stock UA-5 in the mail tomorrow, and I will promptly perform my DIY digimod. I've seen two methods of doing this however.. there's the method on DKlein's page which involves cutting the trace to the R8 resistor and jumping the two solder points in step 2... but I've also heard of another method (recommended by Doug Oade) that is similar but instead of cutting the trace to R8, the resistor R8 is removed entirely... his claim is that it is easily removed and can be saved to solder back onto the board to return functionality (and then the jumper cable would be removed too).... I'm assuming both methods accomplish the same thing, but I'm wondering which is easier and which most people use here on the boards... thanks for the help!