Become a Site Supporter and Never see Ads again!

Author Topic: garbled noise on jb3 recording  (Read 7711 times)

0 Members and 1 Guest are viewing this topic.

Offline c.b.taper

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 268
  • Gender: Male
  • what do you mean its broken...
garbled noise on jb3 recording
« on: December 18, 2004, 10:06:35 AM »
 a couple of days ago i recorded 5th and 6 grade xmass concert here in town.i set up my mics on the lip of the stage Shoeps mk4-vms-v3-jb3. when i returned home and listened throughout the recording the music sounds garbled; not digi noise; the music is there but the best way i can describe the sound is as if tiny drops of water were dropped arbitraraly upon the tape causing the music to become muffled, garbled. i immediately set up my rig at home and triied to recreate the incident. nothing! anyone else have this problem possably can offer up an explaination for why this happened.
microphones b&k 4006, shoeps mk4-schoeps preamp vms-II-grace v3 sd 722 x 2

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9862
  • Gender: Male
    • shows ive taped  that are in circulation
Re: garbled noise on jb3 recording
« Reply #1 on: December 18, 2004, 10:55:12 AM »
kinked optical cable?

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40692
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: garbled noise on jb3 recording
« Reply #2 on: December 18, 2004, 11:11:33 AM »
yep, bet thats the culprit

if ya dont have the sp rt angle optical cable, buy it :)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9862
  • Gender: Male
    • shows ive taped  that are in circulation
Re: garbled noise on jb3 recording
« Reply #3 on: December 18, 2004, 11:19:33 AM »
yep, bet thats the culprit

if ya dont have the sp rt angle optical cable, buy it :)

truth in Bean's words! i bet it was kinked in your bag, and when you got home somehow you got in un-kinked and it worked fine for the time being

Offline c.b.taper

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 268
  • Gender: Male
  • what do you mean its broken...
Re: garbled noise on jb3 recording
« Reply #4 on: December 18, 2004, 12:13:58 PM »
kinked optical cable?
possible but my equipment was not cramped & i will get a rt angle adaper.
microphones b&k 4006, shoeps mk4-schoeps preamp vms-II-grace v3 sd 722 x 2

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9862
  • Gender: Male
    • shows ive taped  that are in circulation
Re: garbled noise on jb3 recording
« Reply #5 on: December 18, 2004, 12:14:52 PM »
your best bet is to buy the SP cable that is right angle toslink > right angle mini

i wouldnt use any other cable!

Offline c.b.taper

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 268
  • Gender: Male
  • what do you mean its broken...
Re: garbled noise on jb3 recording
« Reply #6 on: December 18, 2004, 12:16:28 PM »
your best bet is to buy the SP cable that is right angle toslink > right angle mini

i wouldnt use any other cable!
good call good place to find such an animal?
microphones b&k 4006, shoeps mk4-schoeps preamp vms-II-grace v3 sd 722 x 2

Offline setboy

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 5117
  • Gender: Male
Re: garbled noise on jb3 recording
« Reply #7 on: December 18, 2004, 12:29:23 PM »
your best bet is to buy the SP cable that is right angle toslink > right angle mini

i wouldnt use any other cable!
good call good place to find such an animal?

http://www.soundprofessionals.com/cgi-bin/gold/category.cgi?category=220&item=SP-TMOC-RA&type=store

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9862
  • Gender: Male
    • shows ive taped  that are in circulation
Re: garbled noise on jb3 recording
« Reply #8 on: December 18, 2004, 12:31:43 PM »
it is great because the toslink end swivels, so you can make the cable to any direction out of the optical out you want. just an added bonus

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40692
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: garbled noise on jb3 recording
« Reply #9 on: December 20, 2004, 07:13:32 PM »
it is great because the toslink end swivels, so you can make the cable to any direction out of the optical out you want. just an added bonus

if it wasnt for my own stupidity, i wouldve never found that out
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9862
  • Gender: Male
    • shows ive taped  that are in circulation
Re: garbled noise on jb3 recording
« Reply #10 on: December 21, 2004, 07:14:36 AM »
it is great because the toslink end swivels, so you can make the cable to any direction out of the optical out you want. just an added bonus

if it wasnt for my own stupidity, i wouldve never found that out

if it wasnt for your stupidity, I would have never figured it out either :P

hexyjones

  • Guest
  • Trade Count: (0)
Re: garbled noise on jb3 recording
« Reply #11 on: December 21, 2004, 07:44:53 AM »
a couple of days ago i recorded 5th and 6 grade xmass concert here in town.i set up my mics on the lip of the stage Shoeps mk4-vms-v3-jb3. when i returned home and listened throughout the recording the music sounds garbled; not digi noise; the music is there but the best way i can describe the sound is as if tiny drops of water were dropped arbitraraly upon the tape causing the music to become muffled, garbled. i immediately set up my rig at home and triied to recreate the incident. nothing! anyone else have this problem possably can offer up an explaination for why this happened.

I doubt it's your optical cable...what you describe sounds more like something happening on the analog side(muffled)...not digital...

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40692
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: garbled noise on jb3 recording
« Reply #12 on: December 21, 2004, 06:35:54 PM »
it is great because the toslink end swivels, so you can make the cable to any direction out of the optical out you want. just an added bonus

if it wasnt for my own stupidity, i wouldve never found that out

if it wasnt for your stupidity, I would have never figured it out either :P

good point :P
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

urobouros

  • Guest
  • Trade Count: (0)
Re: garbled noise on jb3 recording
« Reply #13 on: December 21, 2004, 06:53:59 PM »
your best bet is to buy the SP cable that is right angle toslink > right angle mini

i wouldnt use any other cable!
good call good place to find such an animal?

http://www.soundprofessionals.com/cgi-bin/gold/category.cgi?category=220&item=SP-TMOC-RA&type=store

Thanks for the tip.  I just ordered a digimod ua-5   ;D  and will be needing one of these.

Offline c.b.taper

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 268
  • Gender: Male
  • what do you mean its broken...
Re: garbled noise on jb3 recording
« Reply #14 on: December 21, 2004, 07:44:34 PM »
a couple of days ago i recorded 5th and 6 grade xmass concert here in town.i set up my mics on the lip of the stage Shoeps mk4-vms-v3-jb3. when i returned home and listened throughout the recording the music sounds garbled; not digi noise; the music is there but the best way i can describe the sound is as if tiny drops of water were dropped arbitraraly upon the tape causing the music to become muffled, garbled. i immediately set up my rig at home and triied to recreate the incident. nothing! anyone else have this problem possably can offer up an explaination for why this happened.

I doubt it's your optical cable...what you describe sounds more like something happening on the analog side(muffled)...not digital...
exactly besides the way i had everything set up i feel the is no way the connection was compromised.
microphones b&k 4006, shoeps mk4-schoeps preamp vms-II-grace v3 sd 722 x 2

 

RSS | Mobile
Page created in 0.08 seconds with 44 queries.
© 2002-2024 Taperssection.com
Powered by SMF