I'm thinking about running a 3-mic config at WSP Dallas using 1 TL (my other TL needs repair) and a pair of Pelusos (depending if Fozzy's stand can take the weight
). The plan is to run the TL in the middle of the other 2 mics, which will be ran in a DIN config more or less. The TL signal will be from a V2 fed mono into both RCA inputs on a UA5. I have wide-card, card & hyper caps for the pelusos and omni, fig-8, card, & hyper patterns on the TL. So there are a lot of options to choose from.
One way I'm considering is setting the TL on Fig-8 pointed straight ahead and then running the outer mics w/ either wide-card or cards almost 180° to the TL, sort of like an on-the-fly M/S set up w/ the Fig-8 mic used as the mid rather than the side mic.
Another option I could run is to use the TL in omni and then use hypers at around 130°. Or, run the TL hyper and the outer mics either card or wide-card. The acoustics of the venue are very good if I recall correctly. Any advice/caveats? thanks