0 Members and 1 Guest are viewing this topic.
Quote from: STL-Taper on July 13, 2005, 04:28:07 PMi posted this in a thread earlier and copying it here since it's relevant as well.Quote from: STL-Taper on July 12, 2005, 12:14:00 PMat the club i tape at regularly they used to use a pair of Crown PZM microphones on a baffle above the stage for a matrix feed to their CD recorder.One time, i plugged into the soundboard but only the over-the-stage micrphones were being fed to my recorder. i was actually quite surprised how decent it sounded. Drums were slightly heavy in the mix(especialy the cymbols) but the vocals could be discerned and the overall mix wasn't bad.good luck!I think I know that club
i posted this in a thread earlier and copying it here since it's relevant as well.Quote from: STL-Taper on July 12, 2005, 12:14:00 PMat the club i tape at regularly they used to use a pair of Crown PZM microphones on a baffle above the stage for a matrix feed to their CD recorder.One time, i plugged into the soundboard but only the over-the-stage micrphones were being fed to my recorder. i was actually quite surprised how decent it sounded. Drums were slightly heavy in the mix(especialy the cymbols) but the vocals could be discerned and the overall mix wasn't bad.good luck!
at the club i tape at regularly they used to use a pair of Crown PZM microphones on a baffle above the stage for a matrix feed to their CD recorder.One time, i plugged into the soundboard but only the over-the-stage micrphones were being fed to my recorder. i was actually quite surprised how decent it sounded. Drums were slightly heavy in the mix(especialy the cymbols) but the vocals could be discerned and the overall mix wasn't bad.good luck!
yeah, Bob Cogswell tapes a lot of west coast stuff on PZM mics. Maybe you could try searching for him on archive and see if he has any shows up there. Met him at a Hertz and friends show in Humboldt 2002, seems like a nice guy who knows what he is doing.
Quote from: BC on July 13, 2005, 06:49:20 PMyeah, Bob Cogswell tapes a lot of west coast stuff on PZM mics. Maybe you could try searching for him on archive and see if he has any shows up there. Met him at a Hertz and friends show in Humboldt 2002, seems like a nice guy who knows what he is doing. Yeah Bob pulls some good stuff, (On Stage) Crown SASS P-MK2 PZM + (FOH) Crown CM-700MP's > Shure FP42 > Apogee MiniMe is what he runs now I believe ...
why were they pulled from the archive..? i was planning on hitting those sometime...