Become a Site Supporter and Never see Ads again!

Author Topic: Bogen-Manfrotto 3076 17' Stand  (Read 4455 times)

0 Members and 1 Guest are viewing this topic.

Offline soccerkid

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 13
Bogen-Manfrotto 3076 17' Stand
« on: August 19, 2005, 03:58:49 PM »
I am looking to buy one of these and am having trouble finding any place that carries them.  All my local stores said its not in their catalogs any longer.  Did they stop making this stand?

I only found it online at this place www.cambridgeworld.com

I ordered it (seems like a shady site)

I never got a confirmation email, so i called today and they said its back ordered and will be a few weeks......

I would like to cancell my order from there becuase i am a little nervous about the site....but want to find it somewhere else first.

Thanks.

Offline cgrooves

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 804
  • Gender: Male
  • Get On the Bus -Busman Audio
Re: Bogen-Manfrotto 3076 17' Stand
« Reply #1 on: August 19, 2005, 04:23:13 PM »
Most tapers use a 13' stand (or less).  Probably just not a high enough demand from tapers or people in the photo / lighting business for vendors to keep them in stock.  I would be concerned about the compacted length and the footprint size on a stand that would raise to 17' for taping purposes.

To answer your question, though: I don't know anyone who owns one or any vendor who sells them.  Also have no experience dealing with cambridgeworld.com.  Good luck!
AUDIO:
Open:  Busman Audio BSC1-(K1/K2/K3/K4) > Fostex FR-2LE (Busman T Mod) 
                       
Unopen:  AudioReality Omni Mics (Panasonic capsules)> AudioReality Battery Box (depending on SPL's) > iRiver H140 w/ Rockbox

VISUAL:
Canon 7D, Canon 50mm/1.8, Canon 85mm/1.8, Tamron 17-50mm/2.8, Tamron 70-200mm/2.8

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22376
  • Gender: Male
    • Hurricanes Insider
Re: Bogen-Manfrotto 3076 17' Stand
« Reply #2 on: August 19, 2005, 04:26:55 PM »
actually the 17' stand is the one I have, and it has a smaller footprint than the 13' that I did...also more stable since when I dont extend it all the way (which I dont, ever) you have basically 2 tubes inside a couple of sections which makes it alot more stable...

solid stand though...and is perfect for true fob, when you are running at a rowdy show and cant extend the legs...fits right in between amphitheatre seats compacted and you can duct it in place

Offline Lil Kim Jong-Il

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 6498
  • large Marge sent me
Re: Bogen-Manfrotto 3076 17' Stand
« Reply #3 on: August 19, 2005, 06:12:20 PM »
also more stable since when I dont extend it all the way (which I dont, ever) you have basically 2 tubes inside a couple of sections which makes it alot more stable...

This is a very good point.  If you have a 12ft stand extended to 10-12 feet and there are a lot of mics clamped on, it can get wobbly.  A 17' stand that is extended only 10-12 feet will be more rigid.  Depending on how the legs adjust, foot print should be reasonable.

The first rule of amateur neurosurgery club is .... I forget.

Offline Chad817

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 457
  • Gender: Male
  • I'm a llama!
Re: Bogen-Manfrotto 3076 17' Stand
« Reply #4 on: August 19, 2005, 06:16:39 PM »
I have the 3076 as well and don't think I've ever had the legs fully extended.  It's quite stable even with them out halfway.  That being said, I think I've only run it at the full 17' one time.  Most times I'm around 10-12.
studio projects c4 > edirol ua-5 [digi mod] > Microtrack II

laying around: sp cmc-4, power supply and jb3

Offline rowjimmytour

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3776
  • Gender: Male
    • My LMA bookmarks
Re: Bogen-Manfrotto 3076 17' Stand
« Reply #5 on: August 22, 2005, 06:22:07 PM »
I have the 3333  9'4" Bogen and it is light, stable, and has always brought me above the noise of the crowd.
Try here:
http://www.micsupply.com/standproducts.htm
« Last Edit: August 22, 2005, 06:24:51 PM by rowjimmytour »
http://www.archive.org/bookmarNo
And the trees are all kept equal
By hatchet, axe and saw

Offline Rick

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2537
  • Gender: Male
    • My Recordings
Re: Bogen-Manfrotto 3076 17' Stand
« Reply #6 on: August 29, 2005, 08:32:49 AM »
I have the 3333  9'4" Bogen and it is light, stable, and has always brought me above the noise of the crowd.
Try here:
http://www.micsupply.com/standproducts.htm

I've got the 3333 too, and with the legs fully extended its more like 11 feet. 
Retired Taper


 

RSS | Mobile
Page created in 0.043 seconds with 30 queries.
© 2002-2025 Taperssection.com
Powered by SMF