ISO: Daryan ???

[justink]

cease and sesist

huh?  

[Brian]

<<huh? >>

just think of the biggest can worms.  you might have opened it! 

[heath]

an old joke.  do some searching and you'll figure it out.

if you'd like me to look at the cables, let me know.  it shouldn't be too hard to fix.  if you have a continuity tester, you'll be fine fixing them yourself.

[Tim]

long story.... Daryan has a long and sordid past around here

to his credit though he seems to be behaving himself better now

[Tim]

<<huh? >>

just think of the biggest can worms. you might have opened it!

yep

[justink]

you may have stray wires if the strands werent tinned or soldered together correctly, I would consider sending them to someone who can help clean the insides up if needed

an old joke. do some searching and you'll figure it out.

if you'd like me to look at the cables, let me know. it shouldn't be too hard to fix. if you have a continuity tester, you'll be fine fixing them yourself.

i think i'd better send them to someone who knows what the heck they're doing alot more so than myself. 

heath, you up for the task?  pm me and let me know how much and your address and everything...  i appreciate it greatly.

-j

[greenone]

long story.... Daryan has a long and sordid past around here

to his credit though he seems to be behaving himself better now

Wow, Tim and Damon, both giving credit...you been eating paint chips again?

[Ray76]

justink ...he pops up mainly in the team MG board and Playback forums.

hes supposed to be sending me some splitters , and hope they destroy my Mics..

j/k he seems to be real square dealing lately..

[dmonterisi]

justink ...he pops up mainly in the team MG board and Playback forums.

hes supposed to be sending me some splitters , and hope they destroy my Mics..

j/k he seems to be real square dealing lately..

wait a second, daryan is selling stuff here again??

[Ray76]

justink ...he pops up mainly in the team MG board and Playback forums.

hes supposed to be sending me some splitters , and hope they destroy my Mics..

j/k he seems to be real square dealing lately..

wait a second, daryan is selling stuff here again??

Hell no, completely Free Damon, only to make a comp. Never. I like the fella, but I wont buy anything from him till he proves himself and rises above his past.

[dmonterisi]

gotcha...

[Chris K]

yeah...he sold me a pair of cables also...i had to fix them myself. see my post from many moons ago here:

http://taperssection.com/index.php?topic=31167.msg393106#msg393106

[justink]

yeah...he sold me a pair of cables also...i had to fix them myself. see my post from many moons ago here:

http://taperssection.com/index.php?topic=31167.msg393106#msg393106

i bought some purple canare cables with right angle neutric connectors from daryan. i went through 2 shows that are now unlistenable because there was noise on of the channels and/or interemittant cut-outs in each show. turns out there was a short on the soldering of the cables to the connectors. i opened up the connector and couldnt believe what i saw.  it was a mess in there. it looked like a blind person had soldered the connections. i had to resolder the cables myself and added heat shrink wrap, and now they work fine.

THAT'S EXACTLY the problem i'm having!   noise and cut-outs!  what you wrote is almost as if you were looking at and describing my cables!   

thanks for the info.

all you guys rock! 
Heath is gonna help me out w/ these cables and Sixto is sending me some xlr's to use!  i appreciate everything.

[Chris K]

if you want you can send them to me and i will resolder and test them with a cable tester. no charge.

pm me if interested

[Tim]

good stuff