« Reply #15 on: September 14, 2005, 11:38:20 AM »
not exactly the same but I ran into a strange issue woth this last week. I would highlight the channel I needed to check/raise the gain. would hit the get peak level. then when I set the gain and told it to raise it it would raise the channel that wasn't highlighted. did it over and over. so I then tried to highlight the wrong channel thinking it may raise the one I needed. it then raised the one that was highlighted ie the worng channel. no fucking idea why
I ran into that too John..that exact problem...weird.
Me 3. I ended up using SF5 after trying to get it to raise the channel (I know I selected) for 20 minutes.
Logged
Schoeps MK41 & MK4V | Schoeps CMC6, Schoeps KCY, AKI/2C, PFA, Nbox Cable/PFA | Grace V2, Nbox Platinum | SD744T, SD MixPre 6, Sony PCM M10
Canon 16-35mm/2.8L mkii, 24-70mm/2.8L, 70-200mm/2.8L IS, 50mm/1.8 mkii, 135mm/2L, 100mm/2.8L IS, Sigma 35mm/1.4 A | Canon 5D mk4