Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: mp-2 power adapter pin assignment Help  (Read 3,995 times)

0 Members and 1 Guest are viewing this topic.

Offline terrapinj

  • Jonesin' for Tunes
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 6,502
mp-2 power adapter pin assignment Help
« on: February 18, 2006, 01:19:44 PM »
going to make a power cable from the mp-2 to a li-ion battery and need help figuring out which wire to solder to what pin on the mp-2 adapter. attached a photo below of the adapter. the mp-2 is tip positive.

thanks!
Logged
JW mod AKG 460b (ck61/ck63 or mk46/ck1x/ck3x)>  EAA PSP-2 > 722

Segue Dogstar XLRs and Interconnects

ISO: (2) ck2x

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9,696
    • shows ive taped that are in circulation
Re: mp-2 power adapter pin assignment Help
« Reply #1 on: February 18, 2006, 03:09:12 PM »
i also am going to be making one of these cables, i have that part too
Logged

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 20,715
Re: mp-2 power adapter pin assignment Help
« Reply #2 on: February 18, 2006, 03:58:57 PM »
Short one is tip, long is ring.  Use a multimeter on its continuity setting to confirm.
Logged
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) > Roland R-05

Offline terrapinj

  • Jonesin' for Tunes
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 6,502
Re: mp-2 power adapter pin assignment Help
« Reply #3 on: February 18, 2006, 04:10:29 PM »
Quote from: Brian Skalinder on February 18, 2006, 03:58:57 PM
Short one is tip, long is ring.  Use a multimeter on its continuity setting to confirm.

actually just tested it with a multimeter, Brian is correct - as usual. Postive wire will be attached to the short one, negative to long.

Thanks for verifying Skalinder!
Logged
JW mod AKG 460b (ck61/ck63 or mk46/ck1x/ck3x)>  EAA PSP-2 > 722

Segue Dogstar XLRs and Interconnects

ISO: (2) ck2x
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.061 seconds with 27 queries.
© 2002-2026 Taperssection.com
Powered by SMF