Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: Microtrack 2496  (Read 3,158 times)

0 Members and 1 Guest are viewing this topic.

Offline ldseeya

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 39
Microtrack 2496
« on: March 06, 2006, 12:16:17 AM »
I want to use this recorder to patch in and record at live concerts. Is this the unit for me?  Right now Ive been using a MD to patch in, which works really good, however, you have to change discs every 80min and sometimes it will skip to another track while recording.  I want something a little more advanced.  Please help me figure out what my best option is.  Thanks, LD 
Logged

Offline svenkid

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3,565
  • Take Time to Listen!
Re: Microtrack 2496
« Reply #1 on: March 06, 2006, 03:47:43 PM »
the mt could be alittle clunky and bad news for patching just because as far as I know...
1) there are only analoug 1/4 inch outs.
2) after the 2g thing, youd kill the signal.

Although I suppose if you ran it spdif in, and were coming of a splitter, that it would work fine. I have never patched with it.

any other thoughts?
Logged
Quote from: pmonk66 on September 25, 2008, 09:03:53 AM
Seriously, the band makes the music. Tapers just point mics in the right direction and hit "record".

Quote from: Audßall on February 02, 2006, 12:54:42 AM
That's good to hear!  The last patcher I had complained about my AKGs, fluffed schoeps for about 15 minutes, stayed patched in, and farted on me all night long.
rig: Neuman u89s > Lunatec V3 > MT(24)/JB3(16)
http://db.etree.org/svenkid

Um, in my room, one seam is a little off and I stare at it constantly. It's, like, destroying me.

Offline Chris K

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 3,121
  • Bound to cover just a little more ground
Re: Microtrack 2496
« Reply #2 on: March 06, 2006, 03:51:00 PM »
easy to patch with....1/8" in or 1/4" ins, or coax in. make sure you have compatible cables/couplers/splitters and you should be golden pony boy
Logged
My gear: JK Labs AKG DVC > M10
              AKG 460 ck61/ck62/ck63 > DR-70D
             
A live concert to me is exciting because of all the electricity that is generated in the crowd and on stage. It's my favorite part of the business, live concerts.
-Elvis Presley
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.051 seconds with 25 queries.
© 2002-2026 Taperssection.com
Powered by SMF