Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: MT stopped during recording  (Read 3623 times)

0 Members and 1 Guest are viewing this topic.

Offline e.heman

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 8
MT stopped during recording
« on: March 21, 2006, 06:10:07 AM »
Last sunday i started recording. after five minutes the recording stopped. The day before i recorded the card full (2Gig Lexar 80x ) I deleted this file after copying. I tried again and again. Then i remembered one of the tips to format the cf-card every time before recording. So i did. Everything worked fine without problems.

Logged

Offline rodeen

  • Trade Count: (34)
  • Taperssection All-Star
  • ****
  • Posts: 1403
  • Gender: Male
  • Harmonica Man!
Re: MT stopped during recording
« Reply #1 on: March 21, 2006, 10:32:46 AM »
Can you provide additional details?  What firmware are you using?  Were you recording analog in or digital in?  24 bit or 16 bit?  Sample rate?

Glad things worked after reformating the card.  I pretty much reformat the card before I record all the time.  Superstition maybe.

Logged
"It's never too late to have a happy childhood!"
[LMA]: http://archive.org/search.php?query=taper%3A%22odeen%22&sort=-date

Offline dallman

  • Site Supporter
  • Trade Count: (33)
  • Taperssection All-Star
  • *
  • Posts: 1861
  • Gender: Male
Re: MT stopped during recording
« Reply #2 on: March 21, 2006, 12:15:31 PM »
Quote from: e.heman on March 21, 2006, 06:10:07 AM
Last sunday i started recording. after five minutes the recording stopped. The day before i recorded the card full (2Gig Lexar 80x ) I deleted this file after copying. I tried again and again. Then i remembered one of the tips to format the cf-card every time before recording. So i did. Everything worked fine without problems.



I had the same problem, the first time I used my S/PDIF input (Initial use was through 1/8, and them 1/4 TRS). I reformatted too, and the problem went away. Now (on advice from rodeen above) I always reformat before a show, and that seems to work just fine. (I have been using a seagate 5gb microdrive.)
Logged
Support Live Music: Tape A Show Today!
Deck>possibly something here> Mics

Offline e.heman

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 8
Re: MT stopped during recording
« Reply #3 on: March 22, 2006, 05:19:06 PM »
Quote from: rodeen on March 21, 2006, 10:32:46 AM
Can you provide additional details?  What firmware are you using?  Were you recording analog in or digital in?  24 bit or 16 bit?  Sample rate?

Glad things worked after reformating the card.  I pretty much reformat the card before I record all the time.  Superstition maybe.


Quote
Firmware 1.3.3. Using Mics directly on 1/4 trs akg c 2000b with phantom power 24bits 44.1
so very simple indeed. But the recordings are fine. The only tip i want to give: Always format your card before starting a new recording
Logged

Offline raddygast

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 34
Re: MT stopped during recording
« Reply #4 on: March 22, 2006, 08:30:52 PM »
Did you reformat the card within the MT itself (using the Format option in Settings) or did you do it through Windows (with the MT connected through USB.... or with the CF card itself ejected and inserted into a card-reader) ?
Logged

Offline e.heman

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 8
Re: MT stopped during recording
« Reply #5 on: March 23, 2006, 03:21:40 PM »
Quote from: raddygast on March 22, 2006, 08:30:52 PM
Did you reformat the card within the MT itself (using the Format option in Settings) or did you do it through Windows (with the MT connected through USB.... or with the CF card itself ejected and inserted into a card-reader) ?

I formated the card in the MT. I just had ennough time for it lucky me.
Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.035 seconds with 29 queries.
© 2002-2025 Taperssection.com
Powered by SMF