Become a Site Supporter and Never see Ads again!

Author Topic: 1/4 " Phono to USB adaptator - LQQK at this ! -  (Read 1051 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
  • Trade Count: (0)
1/4 " Phono to USB adaptator - LQQK at this ! -
« on: May 16, 2006, 11:50:13 PM »
This is either amazing or poo, not sure what to think of it yet.
The specs are better than a cassette recorder    ;D

  <<==Click it !

Directly Connects Your 1/4" Audio Devices to Your PC's USB Port!

This Unique Cable features Built-in A-to-D Conversion Eliminating the Need for a Sound Card.

# Features Digital Quality Sound Input
# No need for a sound card
# Embedded A/D chip technology with audio signal boost eliminates the need for additional signal conversion devices
# Patented "Live when LitT" technology cable ends light up indicating when sound is being transmitted
# 10 foot heavy-duty shielded cable
# Includes ¬" to Mini Adaptor and ¬" Male to Dual ¬" Female Splitter
# Simple USB plug-and-play connectivity
# Compliant with USB 2.0 Full Speed Operation
# Compliant with USB Audio Device Class

Specification v1.0
# Compatible with Win98 SE / Win ME / Win 2000 / Win XP and Mac OS9 / OS X without additional driver
# Driver software included for older non-plug-and-play compliant computers
# Sony Media Software titles, including Sound Forge, Acid, Vegas , etc. 30 day trial versions
# Resolution: 16 bit 48Khz
# THD + N (-3dBr): -76.1 dB
# SNR: 83.1 dB
# Dynamic Range: 81.6 dB
# Input impedance: 1M Ohms
# Frequency Response 48KHz: 20 - 19.2K Hz
# Signal Input Range: 0 - 2.88 Vpp
# Signal Boost Gain: +20 dB

This LightSnake cable is a 1/4" to USB cable which is ideal for guitars or other musical instruments. The LightSnake instrument cable is basically a "sound card on a cable" and with this cable you can record audio directly onto your computer. Connect the 1/4" mono plug of the LightSnake cable to your instrument and then connect the USB end to one of your computers USB ports.

This is a true USB plug-n-play connection. No additional drivers are needed for the following operating systems - Win 98 SE / Win ME / Win 2000 /Win XP and Mac OS9 / OS X. An ASIO driver is forthcoming for recording software that implements this technology.

An embedded 16 Bit Analog to Digital Converter with audio signal boost ensures extremely low audio loss and 48 KHz Sampling Rate provides you with high audio quality while recording. The HSDL (Host Side Data Loss) Noise Reduction function prevents any unwanted noise when converting the audio signal to digital format and saving to your computer.

The SoundTech LightSnake line was born out of the desire to create a simple solution to provide the ability to enjoy digital recording to everyone. An intelligent instrument-to-PC cable with embedded analog to digital converter and signal booster was created.

The LightSnake USB's unique design enables anyone to plug their guitar, bass, keyboard or other electronic instrument directly into a PC eliminating the hassle, clutter and learning curve associated with high-quality digital recording. This was accomplished by virtually placing a sound card onto the cable.

The LightSnake features SoundTech's patented "Live when Lit" technology cable ends that glow when connected properly and flash indicating when sound is being transmitted. The simplicity of these cables and their price point make the digital recording arena accessible to every one.

The cables are packaged with a DVD that contains 30 day trail versions of all of Sony Media Software titles, including Sound Forge, Acid, Vegas, etc. This addition makes the cable a complete solution right out of the box. Mac users are not left out as GarageBand recording software is on every new Macintosh sold.
« Last Edit: May 16, 2006, 11:53:35 PM by _Bob_ »


  • Guest
  • Trade Count: (0)
Re: 1/4 " Phono to USB adaptator - LQQK at this ! -
« Reply #1 on: May 17, 2006, 09:22:51 AM »
Never seen that before. Nice.


RSS | Mobile
Page created in 0.03 seconds with 41 queries.
© 2002-2020
Powered by SMF