Become a Site Supporter and Never see Ads again!

Author Topic: Microtrack 1.4.1b1 firmware released  (Read 11934 times)

0 Members and 1 Guest are viewing this topic.

Offline jtessier

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 142
Microtrack 1.4.1b1 firmware released
« on: May 25, 2006, 09:48:25 AM »
M-Audio has a fix for the back to back recordings up on their site now.

http://www.m-audio.com/index.php?do=support.drivers&f=725&dl=yes

Or navigate to the Web site, go to Suport -> Drivers -> check the "Show Beta Drivers" checkbox, then choose USB Series -> MicroTrack 24/96 -> then choose any of the operating systems shown (they all lead to the same zip file as far as I can tell).

Here's the Read Me for this release:

This readme covers MicroTrack 24/96 Firmware v1.4.1 b1

NOTE: This is a beta release.  As such, we do not recommend using this release in a critical use environment.  Such use is at your own risk.

If you experience any issues with this release, please use our beta release support form to report it at:

http://www.m-audio.com/index.php?do=support.betaform

============================================================
Installation Instructions:

1) Connect the MicroTrack 24/96 to your Mac or PC (Please refer to your manual for details on this procedure).

2) Copy the three files from this update, "PP5020.mi4", "BL_MPR.rom" and "Resources.arl," onto a properly formatted Compact Flash card to the root (top) directory of your MicroTrack 24/96 (Do not put them in a folder).

3) Properly unmount the MicroTrack 24/96 from the computer (Again, please refer to your manual for complete instructions).

4) On the MicroTrack 24/96, navigate to Main Menu > System > Firmware Update and press the NAV button.

5) You will be asked to verify this action. Press the NAV button again to begin the firmware update. The MicroTrack will show a few messages on the screen while the update is in progress. The four LEDs around the level controls will flash sequentially during the update. When the firmware update is complete, the MicroTrack will automatically reboot. To verify the firmware update was executed, go to Main Menu > System > Version. If the firmware update was successful, it should now show Firmware 1.4.1 b1 and Bootloader 1.02

============================================================

Issue(s) addressed by this release

- When manually stopping a recording, if a second recording was started while the first was still being saved, the second recording wouldn't save to disk.

============================================================

Offline bgalizio

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3555
  • Gender: Male
    • http://www.archive.org/bookmarks/spyboychoir
Re: Microtrack 1.4.1b1 firmware released
« Reply #1 on: May 25, 2006, 10:19:20 AM »
NOTE: This is a beta release.  As such, we do not recommend using this release in a critical use environment.  Such use is at your own risk.

Isn't the Microtrack itself a beta release? :)

Offline it-goes-to-eleven

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 6696
Re: Microtrack 1.4.1b1 firmware released
« Reply #2 on: May 25, 2006, 10:20:51 AM »
The B is because it's da BOMB!   :D




Offline bgalizio

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3555
  • Gender: Male
    • http://www.archive.org/bookmarks/spyboychoir
Re: Microtrack 1.4.1b1 firmware released
« Reply #3 on: May 25, 2006, 10:25:09 AM »
The B is because it's da BOMB!   :D





Sure explodes like one :)

Offline BayTaynt3d

  • Trade Count: (4)
  • Taperssection All-Star
  • ****
  • Posts: 1816
  • Gender: Male
  • Live from San Francisco
    • BayTaper.com
Re: Microtrack 1.4.1b1 firmware released
« Reply #4 on: May 25, 2006, 12:54:39 PM »
The B is because it's da BOMB!   :D

Holy shit that was funny. +T!!!



Sure explodes like one :)

Holy shit that was funny... +T!!!
BayTaper.com | One Man’s Multimedia Journey Through the San Francisco Jazz & Creative Music Scene

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Re: Microtrack 1.4.1b1 firmware released
« Reply #5 on: May 25, 2006, 01:07:45 PM »
I still like 1.2.3
mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

Offline scoper

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 177
  • Gender: Male
Re: Microtrack 1.4.1b1 firmware released
« Reply #6 on: May 25, 2006, 02:28:17 PM »
The two button stop/start was the reason I reverted from 1.4.0 back to 1.3.3 - I'll jump on this one if it solves the issue.

Scott
AT853U cardioid (low sens mod)| Countryman B3 Omni (low sens mod) > CA-UGLY II > Sony PCM-M10

Former: Sony MiniDisc/JB3/MicroTrack/R-09HR

Offline jtessier

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 142
Re: Microtrack 1.4.1b1 firmware released
« Reply #7 on: May 25, 2006, 05:14:04 PM »
The two button stop/start was the reason I reverted from 1.4.0 back to 1.3.3 - I'll jump on this one if it solves the issue.

Scott


It's working for me so far (finger's crossed).

J.T.

Offline olyrc

  • Trade Count: (4)
  • Taperssection All-Star
  • ****
  • Posts: 1208
  • Gender: Male
  • I dig music.
    • My tapes on archive.org
Re: Microtrack 1.4.1b1 firmware released
« Reply #8 on: May 25, 2006, 06:02:04 PM »
I still like 1.2.3

I think that's what I'm on too - no real problems other than the meters wigging after 30 minutes or so.
Sonic Studios DSM-6S/L > PA-24 > TASCAM DR-07

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Re: Microtrack 1.4.1b1 firmware released
« Reply #9 on: May 25, 2006, 07:32:37 PM »
I still like 1.2.3

I think that's what I'm on too - no real problems other than the meters wigging after 30 minutes or so.

I rarely look at the meters, except when I start a recording.
mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

Offline deadheaded

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 826
  • Gender: Male
    • Kind Kables
Re: Microtrack 1.4.1b1 firmware released
« Reply #10 on: May 25, 2006, 11:23:05 PM »
used  1.4.1b1 tonight.   community school concert 5 & 6 graders and middle school kids.
ran the usual mk-41 >vms 5 > kind kables > v-3 @ 24-48 > mt 24/96.  got a dozen pops, big spikes on the wavs. they are not on the jb-3 back up.
going back to 1.4.0 no problems for me with that.
If it's worth getting off the couch, it's worth taping!

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10270
  • Gender: Male
  • I thought I heard.......
Re: Microtrack 1.4.1b1 firmware released
« Reply #11 on: May 26, 2006, 07:26:04 AM »
i've been running 1.2.3 ..... very tempted to upgrade to newer versions, but have not.  My MT has been a rock @ 24/48 and I have yet to run into  set of music long enough to make me stop/start a new file.

very unlike me to use the "if it aint broke, dont fix it" mentality w/my gear.  i'm usualy the first guy to guinnea pig.

Offline silentmark

  • Shine with or without cherries ?
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2685
  • Gender: Male
  • Boat, cucumber, wire ...
Re: Microtrack 1.4.1b1 firmware released
« Reply #12 on: May 26, 2006, 07:46:17 AM »
been running 1.4 since it came out, ran for two days at the Wu Li festival with no issues ...
Dissent is the highest form of patriotism. - Howard Zinn, not Thomas Jefferson ...

Mics: Neumann AK50/AK40/AK30/AK20(1 for M/S), AKG568eb's (gathering dust)
Decks: R-44 (OCM), Fostex FR2LE (OWM), Microtacker (semi-retired), D8 (retired), D7 (retired)
Pre-amps: Apogee Minime (semi-retired), Sonosax SX-M2 (semi-retired), Oade mod SBM-1 (retired)
Cables: LC3 actives (older lemo style x2), Audio Magic Hyper Conductor interconnects

http://www.youtube.com/watch?v=J3qrWOOposQ

Offline BC

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2269
  • Gender: Male
  • Bongo Bongo
Re: Microtrack 1.4.1b1 firmware released
« Reply #13 on: May 26, 2006, 12:14:37 PM »
used  1.4.1b1 tonight.   community school concert 5 & 6 graders and middle school kids.
ran the usual mk-41 >vms 5 > kind kables > v-3 @ 24-48 > mt 24/96.  got a dozen pops, big spikes on the wavs. they are not on the jb-3 back up.
going back to 1.4.0 no problems for me with that.

ouch, any further testing to see if it is repeatable?

I was about to throw in 1.4.1b1 for Summer Camp this weekend, guess I will hold off on that!

Thanks for sharing the info, +t.

In: DPA4022>V3>Microtracker/D8

Out: Morrison ELAD>Adcom GFA555mkII>Martin Logan Aerius i

Offline anhisr

  • Trade Count: (6)
  • Needs to get out more...
  • Posts: 2974
  • Gender: Male
Re: Microtrack 1.4.1b1 firmware released
« Reply #14 on: May 26, 2006, 12:34:51 PM »
I ran a dat from my r500 > digii to the MT using the new firmware and had no problems at all. 
Audio: Neumann KM 100> 20, 30, 40, 43 or 50 > V3 > MT II (love that M/S)
Still Camera Body: Canon D5 Mark II
Canon Lenses:  16-35mm f2.8L II USM; 28-135mm f3.5-5.6 IS USM; 70-200mm f2.8L IS USM
Video Canon HF R30

archive  http://www.archive.org/bookmarks/anhisr

 

RSS | Mobile
Page created in 0.068 seconds with 44 queries.
© 2002-2024 Taperssection.com
Powered by SMF