0 Members and 1 Guest are viewing this topic.
try using a little dabof 5minute epoxy on the end of a small bamboo skrewer. Put a dab on the end of the skrewer hold it against the battery, let dry in 10 minutes slowly pull the battery out. A little squirt of silicone around the outside of the battery might also help. but don't squirt the silcone spray until the epoxy is set.....just a thought..
Well, I think that unscrew the compartment of the internals, the internal was catched because have a piece of tape and it hit with the end of compartment that have less diameter. Sorry for my poor explanation, I not have any idea about electronics