Hello,
I need to record/video a lecture/speech session but the speaker doesn't like large microphone setup. I am currently using Oktava MC012 with Hyper capsule running into a Yamaha mixer that feed into Canon GL2 through mic input.
The problem that I have include:
1. The mic is currently setup on table and is there any better Mic options? ( I've considered Boundary layer mic)
2. The result on the GL2 is not satisfactory ( clipping as the speaker has a wide level ) and noise. Should I use separate preamp othe than GL2/Yamaha?
3. I am also considering backup recording with additional digital recorder, what would be the recommended setup ( We still need to run it through the mixer for spearker output)
Thanks in advance.
Ed
With using a mic input into a mixer, then dedicated audio recorder is your best option as the MIC input on the camera is way too sensitive for large mixer output.
Other possible option is to power the mic, and go direct into the camera set on lower manual gain setting (try out different camera manual input gains for having enough, but not so much as louder portions clip distort the camera input.
In general, Sony and Canon camera audio features and quality is limited, but for speech may be adequate if mic is connected directly and camera's mic input with sensitivity and manual REC level settings are adjusted for acceptable results.