Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: Cables and Mic Stand  (Read 8,825 times)

0 Members and 1 Guest are viewing this topic.

Offline stevenjc

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
  • I'm a llama!
Cables and Mic Stand
« on: September 28, 2003, 05:30:30 PM »
What's up guys? Iam getting close to buying my first rig, it's hopefully going to be a pair of akg c1000s>ad-20>d8 or jb3, what cables will i need? and what would you recomend for my first mic stand?

Thanks so much,
Steve
« Last Edit: October 10, 2003, 12:31:04 AM by stevenjc »
Logged

Offline BCostigan

  • I can resist everything except temptation
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 3,581
  • Loose Lucy is my delight
    • GranitePhotography
Re:Wires and Mic Stand
« Reply #1 on: September 28, 2003, 06:25:58 PM »
Welcome to the wonderful worl of taping....hand over your wallet at the door! :)


Cables....

Pair of xlr mic cables (male one end female on the other)  There are tons to chose from...you can spend $20 -> $300+ on a pair

I'd get a active 7 pin from oade if going with the dat...a toslink to....whatever digi in is on the jb3 :P



I'm sure there are more ideas and opinions...have fun!
Logged
"A Hippie is someone who walks like Tarzan, looks like Jane, and smells like Cheetah."  ~Ronald Reagan

Offline stevenjc

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
  • I'm a llama!
Re:Wires and Mic Stand
« Reply #2 on: September 28, 2003, 07:15:10 PM »
thanks bro, i'll check thoes out.
Logged

Offline Cooker

  • Local Crew
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 8,696
Re:Wires and Mic Stand
« Reply #3 on: September 28, 2003, 07:22:20 PM »
Quote from: BCostigan on September 28, 2003, 06:25:58 PM

I'd get a active 7 pin from oade if going with the dat...

can you even buy an oade active cable by itself anymore? i thought they only sold  them to you if you bought your dat from them.
Logged

DaryanLenz

  • Guest
  • Trade Count: (0)
Re:Wires and Mic Stand
« Reply #4 on: September 28, 2003, 07:49:18 PM »
Get canare star quad mic cables as they procide the best bang for buck.  I could make you a pair of straight angles if you would want them pretty cheap like!

Daryan
Logged

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6,336
Re:Wires and Mic Stand
« Reply #5 on: September 28, 2003, 07:57:31 PM »
a couple new Pro digital active cables on e-bay now. (Prodigital selling them)

I thought Oade will sell just the cable now.  But, I may be wrong?
Logged
TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

Offline InfiniteOhms

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 656
    • LMA Uploads
Re:Wires and Mic Stand
« Reply #6 on: September 28, 2003, 09:05:50 PM »
i would definately recomend the JB3 (+ a toslink to mini optical from seller "accessoryking-com" on ebay [$6 shipped)

there is a TON of info on the jb3 floating around this board, so dont make any uninformed desisions.
Logged
ADK A-51s LE's > Oade W-mod UA-5 > Zoom H4n Pro if I bother to drag out a full rig. More often just the H4N Pro. My LMA tapes

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6,336
Re:Wires and Mic Stand
« Reply #7 on: September 28, 2003, 09:47:40 PM »
The more I use the JB3....the more I like it.
Logged
TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

cpclark

  • Guest
  • Trade Count: (0)
Re:Wires and Mic Stand
« Reply #8 on: September 29, 2003, 12:41:04 PM »
Quote from: cooker on September 28, 2003, 07:22:20 PM
Quote from: BCostigan on September 28, 2003, 06:25:58 PM

I'd get a active 7 pin from oade if going with the dat...

can you even buy an oade active cable by itself anymore? i thought they only sold  them to you if you bought your dat from them.

i checked the website and they do sell them individually there are two types, ones active, 110 and 165 i think both are i/o's
Logged

Offline stevenjc

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
  • I'm a llama!
Re:Wires and Mic Stand
« Reply #9 on: September 30, 2003, 05:41:02 PM »
thanks to everyone that responded
one more quick question   :)

about what length should the cables be?


steve
« Last Edit: October 10, 2003, 12:31:24 AM by stevenjc »
Logged

Offline John R

  • Trade Count: (2)
  • Needs to get out more...
  • Posts: 10,065
    • www.tapers.org
Re:Wires and Mic Stand
« Reply #10 on: September 30, 2003, 07:01:46 PM »
20 or 25 feet

jr
Logged
we all live downstream.

Offline ianstone

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 4,009
  • schoeps>something>something else
    • My Recordings on ARCHIVE
Re:Wires and Mic Stand
« Reply #11 on: September 30, 2003, 07:52:55 PM »
Quote from: stevenjc on September 30, 2003, 05:41:02 PM
thanks to everyone that responded
one more quick question   :)

about what length should the wires be?


steve

i don't know why, but this irks me.

"Wires" are more of an electrical thing.
"Cables" are for audio, and used to transmit sound frequencies...

Logged
Microphones:
CCM4v (pair)
mk6 (pair) and mk41 (pair) with kc5's & cmc6's
mk21 (1) for those M/S situations

Preamps:
Sonosax SX-M2

Recorders:
Sound Devices 722
Edirol R-01

My Recordings on archive http://www.archive.org/search.php?query=%22ian%20stone%22

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4,754
  • "I hate the f***in' eagles, man!"
Re:Wires and Mic Stand
« Reply #12 on: September 30, 2003, 08:33:15 PM »
Quote from: ianstone on September 30, 2003, 07:52:55 PM
Quote from: stevenjc on September 30, 2003, 05:41:02 PM
thanks to everyone that responded
one more quick question   :)

about what length should the wires be?


steve

i don't know why, but this irks me.

"Wires" are more of an electrical thing.
"Cables" are for audio, and used to transmit sound frequencies...

Agreed.  15 feet is more than enough for me.  YMMV
Logged
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline John R

  • Trade Count: (2)
  • Needs to get out more...
  • Posts: 10,065
    • www.tapers.org
Re:Wires and Mic Stand
« Reply #13 on: September 30, 2003, 10:48:37 PM »
Quote from: ianstone on September 30, 2003, 07:52:55 PM
Quote from: stevenjc on September 30, 2003, 05:41:02 PM
thanks to everyone that responded
one more quick question   :)

about what length should the wires be?


steve

i don't know why, but this irks me.

"Wires" are more of an electrical thing.
"Cables" are for audio, and used to transmit sound frequencies...



yeah, i know what you mean.  i have a custom audio company and affectionately use the term "pulling wire", even though most of my wire carries voice/audio.

literally, cable has wires in it.

jr
Logged
we all live downstream.

Offline stevenjc

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
  • I'm a llama!
Re:Cables and Mic Stand
« Reply #14 on: October 10, 2003, 12:32:49 AM »
thanks for the heads up about cables vs wires guys

take care,
steve
Logged
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.1 seconds with 37 queries.
© 2002-2026 Taperssection.com
Powered by SMF