Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1 2 All   Go Down

Author Topic: what microphone ? For TECHNO  (Read 16,114 times)

0 Members and 1 Guest are viewing this topic.

Offline tapasboy

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 8
what microphone ? For TECHNO
« on: October 05, 2006, 01:08:53 PM »
Hello,
I would like to recording up predominantly in a club of Techno.
With my MZ-RH1 - what for microphone you would advise me. How should I go forward?

thanks
Logged

Offline Church-Audio

  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 7,571
Re: what microphone ? For TECHNO
« Reply #1 on: October 05, 2006, 01:25:19 PM »
Quote from: tapasboy on October 05, 2006, 01:08:53 PM
Hello,
I would like to recording up predominantly in a club of Techno.
With my MZ-RH1 - what for microphone you would advise me. How should I go forward?

thanks

Check out my cardioid mics they are one sale to TS members for $69.99 a pair.
Logged
for warranty returns email me at
EMAIL Sales@church-audio.com

Offline rowjimmy

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2,173
  • rowjimmy.com
    • Row Knows
Re: what microphone ? For TECHNO
« Reply #2 on: October 06, 2006, 08:58:52 AM »
honestly, you're probably better off asking if you can patch. If you offer the DJ a copy, you might be pleasantly suprised.
IME, the SPLs in most techno/house/dance clubs are extraordinary and the PAs are often far too overdriven. what you'd get from a feed off the mixer would be far cleaner and a truer representation of the DJ's performance.
Logged
Bandcamp | Host of The Brokedown Podcast
mic > wires > recorder

Offline Church-Audio

  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 7,571
Re: what microphone ? For TECHNO
« Reply #3 on: October 06, 2006, 09:30:05 AM »
Quote from: rowjimmy on October 06, 2006, 08:58:52 AM
honestly, you're probably better off asking if you can patch. If you offer the DJ a copy, you might be pleasantly suprised.
IME, the SPLs in most techno/house/dance clubs are extraordinary and the PAs are often far too overdriven. what you'd get from a feed off the mixer would be far cleaner and a truer representation of the DJ's performance.

Good point its been so long since I have worked a rave I forgot what they do to a sound system :)
Logged
for warranty returns email me at
EMAIL Sales@church-audio.com

Offline tapasboy

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 8
Re: what microphone ? For TECHNO
« Reply #4 on: October 06, 2006, 10:36:29 AM »
Many dj's do not like it theirs set's are to be got... In addition, I would like to unique ones took up... More known DJ's allow not directly in Mixer to take up... This would be dream!

Questions is not in it ...: who has idea or how you would go forward? line in , Bass-roll-off ???
« Last Edit: October 06, 2006, 10:43:29 AM by tapasboy »
Logged

Offline Church-Audio

  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 7,571
Re: what microphone ? For TECHNO
« Reply #5 on: October 06, 2006, 12:32:45 PM »
Quote from: tapasboy on October 06, 2006, 10:36:29 AM
Many dj's do not like it theirs set's are to be got... In addition, I would like to unique ones took up... More known DJ's allow not directly in Mixer to take up... This would be dream!

Questions is not in it ...: who has idea or how you would go forward? line in , Bass-roll-off ???

Line in bass roll off my cardioid mics and my st-9100 preamp would be very good $199.99 + shipping. good deal for you my friend.

Chris Church
Logged
for warranty returns email me at
EMAIL Sales@church-audio.com

Offline rowjimmy

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2,173
  • rowjimmy.com
    • Row Knows
Re: what microphone ? For TECHNO
« Reply #6 on: October 06, 2006, 03:59:39 PM »
hrmmm. DJs I know and my experiences have been different... good luck.
Logged
Bandcamp | Host of The Brokedown Podcast
mic > wires > recorder

Offline twatts

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9,925
  • Lego made a Mini-Fig of me!
Re: what microphone ? For TECHNO
« Reply #7 on: October 06, 2006, 04:13:45 PM »
Quote from: Church-Audio on October 06, 2006, 12:32:45 PM
Quote from: tapasboy on October 06, 2006, 10:36:29 AM
Many dj's do not like it theirs set's are to be got... In addition, I would like to unique ones took up... More known DJ's allow not directly in Mixer to take up... This would be dream!

Questions is not in it ...: who has idea or how you would go forward? line in , Bass-roll-off ???

Line in bass roll off my cardioid mics and my st-9100 preamp would be very good $199.99 + shipping. good deal for you my friend.

Chris Church


I know its none of my business, but this guy is looking for advice, not an advertisment.

Terry

Logged
RETIRED

Offline Church-Audio

  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 7,571
Re: what microphone ? For TECHNO
« Reply #8 on: October 06, 2006, 06:06:39 PM »
Quote from: twatts on October 06, 2006, 04:13:45 PM
Quote from: Church-Audio on October 06, 2006, 12:32:45 PM
Quote from: tapasboy on October 06, 2006, 10:36:29 AM
Many dj's do not like it theirs set's are to be got... In addition, I would like to unique ones took up... More known DJ's allow not directly in Mixer to take up... This would be dream!

Questions is not in it ...: who has idea or how you would go forward? line in , Bass-roll-off ???

Line in bass roll off my cardioid mics and my st-9100 preamp would be very good $199.99 + shipping. good deal for you my friend.

Chris Church


I know its none of my business, but this guy is looking for advice, not an advertisment.

Terry



Its not an advertisement its a sales pitch, I believe as do many others on this board that my mics are very good. I know it sounds like I am just trying to sell my gear, but to be honest there is nothing in this price range that even comes close to the sound of my mics and preamp. IMHO, if there is please point the way. I do not need the extra business. I was only trying to help this guy out with a good price. I guess I can always count on people to say something negative, when I am only really trying to help some of you out with good prices. I guess I should overcharge like everyone else does?


Chris Church

PS... I am not ofended by your comments just disapointed that I cant speak my mind with out getting BS for doing so. If you dont agree my products are good thats ok. Why not insted of being criticale, RECOMEND SOMETHING FOR THIS GUY. Hey theres an idea! insted of wasting time being negitive, why not try and point him to some gear that will do the job he asked for? wow what a concept.

Logged
for warranty returns email me at
EMAIL Sales@church-audio.com

Offline twatts

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9,925
  • Lego made a Mini-Fig of me!
Re: what microphone ? For TECHNO
« Reply #9 on: October 06, 2006, 08:49:07 PM »
Quote from: Church-Audio on October 06, 2006, 06:06:39 PM
Quote from: twatts on October 06, 2006, 04:13:45 PM
Quote from: Church-Audio on October 06, 2006, 12:32:45 PM
Quote from: tapasboy on October 06, 2006, 10:36:29 AM
Many dj's do not like it theirs set's are to be got... In addition, I would like to unique ones took up... More known DJ's allow not directly in Mixer to take up... This would be dream!

Questions is not in it ...: who has idea or how you would go forward? line in , Bass-roll-off ???

Line in bass roll off my cardioid mics and my st-9100 preamp would be very good $199.99 + shipping. good deal for you my friend.

Chris Church


I know its none of my business, but this guy is looking for advice, not an advertisment.

Terry



Its not an advertisement its a sales pitch, I believe as do many others on this board that my mics are very good. I know it sounds like I am just trying to sell my gear, but to be honest there is nothing in this price range that even comes close to the sound of my mics and preamp. IMHO, if there is please point the way. I do not need the extra business. I was only trying to help this guy out with a good price. I guess I can always count on people to say something negative, when I am only really trying to help some of you out with good prices. I guess I should overcharge like everyone else does?


Chris Church

PS... I am not ofended by your comments just disapointed that I cant speak my mind with out getting BS for doing so. If you dont agree my products are good thats ok. Why not insted of being criticale, RECOMEND SOMETHING FOR THIS GUY. Hey theres an idea! insted of wasting time being negitive, why not try and point him to some gear that will do the job he asked for? wow what a concept.



Sales pitch.  Yes, that is a better description. 

I don't offer a suggestion because I know nothing of the person's needs. 

And I'm have no qualms with your products.  I actually do appreciate your effort in providing high-quality gear to tapers in general. 

But you also know nothing of this person's needs and you offer to sell him your product right off the bat.  It gives the impression that you are more interested in selling your product than giving true advise.  That's why I'm being, as you put it, "critical".

Terry

PS  My advice for TapasBoy is to read the many stealth threads on the board.  I'm sure after some thought and self-education, Tapas can figure out what he needs.  And that may even be Church Audio products. 

Logged
RETIRED

Offline Church-Audio

  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 7,571
Re: what microphone ? For TECHNO
« Reply #10 on: October 06, 2006, 09:08:09 PM »
Quote from: twatts on October 06, 2006, 08:49:07 PM
Quote from: Church-Audio on October 06, 2006, 06:06:39 PM
Quote from: twatts on October 06, 2006, 04:13:45 PM
Quote from: Church-Audio on October 06, 2006, 12:32:45 PM
Quote from: tapasboy on October 06, 2006, 10:36:29 AM
Many dj's do not like it theirs set's are to be got... In addition, I would like to unique ones took up... More known DJ's allow not directly in Mixer to take up... This would be dream!

Questions is not in it ...: who has idea or how you would go forward? line in , Bass-roll-off ???

Line in bass roll off my cardioid mics and my st-9100 preamp would be very good $199.99 + shipping. good deal for you my friend.

Chris Church


I know its none of my business, but this guy is looking for advice, not an advertisment.

Terry



Its not an advertisement its a sales pitch, I believe as do many others on this board that my mics are very good. I know it sounds like I am just trying to sell my gear, but to be honest there is nothing in this price range that even comes close to the sound of my mics and preamp. IMHO, if there is please point the way. I do not need the extra business. I was only trying to help this guy out with a good price. I guess I can always count on people to say something negative, when I am only really trying to help some of you out with good prices. I guess I should overcharge like everyone else does?


Chris Church

PS... I am not ofended by your comments just disapointed that I cant speak my mind with out getting BS for doing so. If you dont agree my products are good thats ok. Why not insted of being criticale, RECOMEND SOMETHING FOR THIS GUY. Hey theres an idea! insted of wasting time being negitive, why not try and point him to some gear that will do the job he asked for? wow what a concept.



Sales pitch.  Yes, that is a better description. 

I don't offer a suggestion because I know nothing of the person's needs. 

And I'm have no qualms with your products.  I actually do appreciate your effort in providing high-quality gear to tapers in general. 

But you also know nothing of this person's needs and you offer to sell him your product right off the bat.  It gives the impression that you are more interested in selling your product than giving true advise.  That's why I'm being, as you put it, "critical".

Terry

PS  My advice for TapasBoy is to read the many stealth threads on the board.  I'm sure after some thought and self-education, Tapas can figure out what he needs.  And that may even be Church Audio products. 



This is what he was asking for, I know something about his needs since he asked for help I helped him.
Hello,
I would like to recording up predominantly in a club of Techno.
With my MZ-RH1 - what for microphone you would advise me. How should I go forward?

thanks

Logged
for warranty returns email me at
EMAIL Sales@church-audio.com

dorrcoq

  • Guest
  • Trade Count: (0)
Re: what microphone ? For TECHNO
« Reply #11 on: October 07, 2006, 12:21:18 AM »
Quote from: Church-Audio on October 06, 2006, 06:06:39 PM

I guess I should overcharge like everyone else does?

Uhhhhhhh, let's not get carried away now! ;D
Logged

Offline Church-Audio

  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 7,571
Re: what microphone ? For TECHNO
« Reply #12 on: October 07, 2006, 01:16:46 AM »
Quote from: dorrcoq on October 07, 2006, 12:21:18 AM
Quote from: Church-Audio on October 06, 2006, 06:06:39 PM

I guess I should overcharge like everyone else does?

Uhhhhhhh, let's not get carried away now! ;D

Not everyone  ;D just some  ;)
Logged
for warranty returns email me at
EMAIL Sales@church-audio.com

RebelRebel

  • Guest
  • Trade Count: (0)
Re: what microphone ? For TECHNO
« Reply #13 on: October 08, 2006, 09:33:28 PM »
i dont know, Chris suggested a product based off his own experience, unlike guysonic who pimps on every thread, whether talking about concerts or lets say....ice cream.

Chris isnt overbearing.
Logged

Offline Wiggler

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1,307
Re: what microphone ? For TECHNO
« Reply #14 on: October 08, 2006, 10:28:50 PM »
You may consider looking into some DPA 4061 microphones and a MPS6030 power supply for your needs.
DPA -  Danish Pro Audio is a quality builder of microphones that can handle high sound pressure levels.
http://www.dpamicrophones.com/
Logged
Pages: Pages1 2 All   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.196 seconds with 38 queries.
© 2002-2026 Taperssection.com
Powered by SMF