Best Li-Ion route for a V3 and a 2k.

[Jhurlbs81]

So with the uprgade to the 2k, I must replace my lead with Li-Ion.  What's my best bet?  My V3 is currently set to 6v.  Two DVD batts? One for each? I see a 5400mAH can be had for 40 beans..

Jesse

[gratefulphish]

What's the volatage on the 2K?  The V3 is either set to run on 6 or 12V.  It really is the same, it's just a calibration inside so that the low battey indicator works.  You may also want to check out this thread http://taperssection.com/index.php/topic,78206.0.html

I have been running a V3 on one of the 9V Wallys, and it is running fine, and according to that thread, is not an issue.  Need to know what the 2K needs to run.

[JNT]

The AD2k is 12V.  Two of the DVD batteries in series would work if they have a 6V setting otherwise you could use a voltage regulator to drop the 18V down to 12V.

Joe

[hammerhorror]

The AD2k is 12V.  Two of the DVD batteries in series would work if they have a 6V setting otherwise you could use a voltage regulator to drop the 18V down to 12V.

Joe

The AD2K+ will run on any voltage between 12v - 18v. So any Li-ion in that range will work.

[gratefulphish]

I would consider getting your V3 reset to 12V, instead of 6, and that way you can have just one battery system to contend with.

[Jhurlbs81]

Ballpark ideas on total batt life with a V3 & AD2k running off a EC-90?

Thanks,
Jesse