Become a Site Supporter and Never see Ads again!

Author Topic: Does Oade ACM PMD-660 Allow SBD Recordings?  (Read 2456 times)

0 Members and 1 Guest are viewing this topic.

Offline Cheesecadet

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 3024
  • Gender: Male
  • http://db.etree.org/cheesecadet
Does Oade ACM PMD-660 Allow SBD Recordings?
« on: February 12, 2007, 07:06:03 PM »
Pretty simple question I gues...but can you still make SBD recordingas if you have this particular mod done to the unit?  Would you still just run XLRs off the board into the unit with Phantom turned off?

Just curious because it says on the Oade page that this mod disables the line in/out feature.

Also, does the 48v phantom seem to work with most condensers?


I'm interested down the road in this unit unless something else shows up here n the next 6 months or so.

Ryan
AKG 481's > Hi H0s > MixPre-3 |  4061's (Matched) > Tinybox v1.5 > PCM-A10 |  AT933's w/ AT853-ELE's (SC/C/O)

Vinyl:
Fluance RT83 Reference > MCS 3230 Receiver > Realistic MC-500's (NOS)

Upcoming:
01/23 Phil Hanley - Comedy Works
01/30 Michael Blaustein - Comedy Works
02/08 ManyColors: J. Dilla Tribute - Dazzle
04/03 Bill Frisell - Gates Hall
04/24 Dead & Co. - Sphere
06/18 FirstGrass
06/19 TBF
06/20 TBF

Offline dennisrtyler

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 4831
  • Gender: Male
Re: Does Oade ACM PMD-660 Allow SBD Recordings?
« Reply #1 on: February 12, 2007, 07:09:58 PM »
you can run XLR into the 660 for SBD recording and as far as i know the phantom works for all mics that require up to 48v.
4. im so abrasive i make sandpaper nervous.

Schoeps CMR/mk4 > Naiant PFA > Oade Concert Mod Marantz PMD-661

Offline gratefulphish

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1569
  • Gender: Male
  • Gone Tapin'
Re: Does Oade ACM PMD-660 Allow SBD Recordings?
« Reply #2 on: February 12, 2007, 07:32:40 PM »
48v is usually the max necessary to power condensor mics, just make sure not to turn on the phantom power if you are plugged into the board.
4 channel: Neumann TLM-170R>Segue Dogstar>SD 722   2 channel: Neumann TLM-170R>Segue Dogstar>Lunatec V3>SD 722
               Linked to Lunatec V3>MT 24/96                                     (Hi-Ho Silver Interconnects)     

Other gear: AKG C451Es, Tascam DA-P1, Sony D-8

 

RSS | Mobile
Page created in 0.03 seconds with 26 queries.
© 2002-2025 Taperssection.com
Powered by SMF