Become a Site Supporter and Never see Ads again!

Author Topic: Anyone making dead rats? Need some for AKG CK69s.  (Read 4324 times)

0 Members and 1 Guest are viewing this topic.

Offline china_rider

  • Trade Count: (1)
  • Taperssection All-Star
  • ****
  • Posts: 1976
  • Gender: Male
  • The center of the universe is not on this earth...
    • AZTapers
Anyone making dead rats? Need some for AKG CK69s.
« on: June 01, 2007, 11:18:41 PM »
Hey all,  Been away for a little while due to a surgery, but am back and healing and about to start taping again.  While gone I decided to sell my used CK69s to someone doing the festival circuit this summer since I would not be using them for several months.  After they were sold I went ahead and ordered a new pair from Boxy.  They just arrived and I hope to get to use them at the end of the month.

Since guns are so sensitive to wind I was thinking dead rats would be a good addition to the setup.  However, I can't even reattach a button much less make a pair of dead rats.  Anyone with some sewing knowledge care to make and sell me few pairs?  I would want one pair for the long configuration and one pair for the short.  Also possibly another pair for the normal 48X setup.

Stay Kind,
Dana
(#1) AKG C480b CK61,CK62,CK63,CK69 -> Silverpath XLRs -> BMod R-4
(#2) BMod ADK A51TL -> Silverpath XLRs -> BMod R-4
(#3) Sonic Studios DSM6SM -> Sonic Studios PA-3SX -> R-09

Offline gratefulphish

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1568
  • Gender: Male
  • Gone Tapin'
Re: Anyone making dead rats? Need some for AKG CK69s.
« Reply #1 on: June 02, 2007, 03:14:45 AM »
PM Darkstarjedi.  He made mine, for an extremely reasonable price. 
4 channel: Neumann TLM-170R>Segue Dogstar>SD 722   2 channel: Neumann TLM-170R>Segue Dogstar>Lunatec V3>SD 722
               Linked to Lunatec V3>MT 24/96                                     (Hi-Ho Silver Interconnects)     

Other gear: AKG C451Es, Tascam DA-P1, Sony D-8

Offline Josephine

  • Trade Count: (6)
  • Needs to get out more...
  • Posts: 5215
  • Gender: Female
Re: Anyone making dead rats? Need some for AKG CK69s.
« Reply #2 on: June 03, 2007, 07:02:53 PM »
PM Darkstarjedi.  He made mine, for an extremely reasonable price. 

Yep . . . he's your man.
:)
Schoeps MK4 / MK4v / MK41 > actives > NBox+ > R-09HR



~   On Dime   ~
~   My Recordings   ~
~   Live Music Archive   ~

Offline china_rider

  • Trade Count: (1)
  • Taperssection All-Star
  • ****
  • Posts: 1976
  • Gender: Male
  • The center of the universe is not on this earth...
    • AZTapers
Re: Anyone making dead rats? Need some for AKG CK69s.
« Reply #3 on: June 03, 2007, 07:47:23 PM »
Thanks all... Got in contact.  Need to get some measurements and some pictures.  I don't sew so I don't know if this makes it much more difficult but the guns have a pretty narrow windscreen at the tip and then it is about twice the circumference at the end.
(#1) AKG C480b CK61,CK62,CK63,CK69 -> Silverpath XLRs -> BMod R-4
(#2) BMod ADK A51TL -> Silverpath XLRs -> BMod R-4
(#3) Sonic Studios DSM6SM -> Sonic Studios PA-3SX -> R-09

Offline Josephine

  • Trade Count: (6)
  • Needs to get out more...
  • Posts: 5215
  • Gender: Female
Re: Anyone making dead rats? Need some for AKG CK69s.
« Reply #4 on: June 03, 2007, 08:02:39 PM »
Thanks all... Got in contact.  Need to get some measurements and some pictures.  I don't sew so I don't know if this makes it much more difficult but the guns have a pretty narrow windscreen at the tip and then it is about twice the circumference at the end.

The dead rats will be as wide as the widest part of your windscreen -- they'll slip right over without problem.
I think DarkStarJedi just needs the length and circumference (at the widest part).
Mine are great -- I ordered a second pair.
:)
Schoeps MK4 / MK4v / MK41 > actives > NBox+ > R-09HR



~   On Dime   ~
~   My Recordings   ~
~   Live Music Archive   ~

Offline china_rider

  • Trade Count: (1)
  • Taperssection All-Star
  • ****
  • Posts: 1976
  • Gender: Male
  • The center of the universe is not on this earth...
    • AZTapers
Re: Anyone making dead rats? Need some for AKG CK69s.
« Reply #5 on: June 03, 2007, 08:16:29 PM »
I'm trying to figure out how many pairs I want to get.  Need one for the short gun config, long gun config, and them maybe my TLs or normal 480 caps.
(#1) AKG C480b CK61,CK62,CK63,CK69 -> Silverpath XLRs -> BMod R-4
(#2) BMod ADK A51TL -> Silverpath XLRs -> BMod R-4
(#3) Sonic Studios DSM6SM -> Sonic Studios PA-3SX -> R-09

Offline Josephine

  • Trade Count: (6)
  • Needs to get out more...
  • Posts: 5215
  • Gender: Female
Re: Anyone making dead rats? Need some for AKG CK69s.
« Reply #6 on: June 03, 2007, 10:45:53 PM »
I'm trying to figure out how many pairs I want to get.  Need one for the short gun config, long gun config, and them maybe my TLs or normal 480 caps.

I'm such a girl . . . . I'm getting mine in different colors.   :P
Schoeps MK4 / MK4v / MK41 > actives > NBox+ > R-09HR



~   On Dime   ~
~   My Recordings   ~
~   Live Music Archive   ~

Offline poorlyconditioned

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1958
  • I'm a tapir!
Re: Anyone making dead rats? Need some for AKG CK69s.
« Reply #7 on: June 04, 2007, 01:35:50 AM »
I'm trying to figure out how many pairs I want to get.  Need one for the short gun config, long gun config, and them maybe my TLs or normal 480 caps.

I'm such a girl . . . . I'm getting mine in different colors.   :P

One taper I saw had grey and beige ones.  They remind me of my gerbils.  Sadly the grey one passed away, but the golden one is still scurrying around.

  Richard
Mics: Sennheiser MKE2002 (dummy head), Studio Projects C4, AT825 (unmodded), AT822 franken mic (x2), AT853(hc,c,sc,o), Senn. MKE2, Senn MKE40, Shure MX183/5, CA Cards, homebrew Panasonic and Transsound capsules.
Pre/ADC: Presonus Firepod & Firebox, DMIC20(x2), UA5(poorly-modded, AD8620+AD8512opamps), VX440
Recorders: Edirol R4, R09, IBM X24 laptop, NJB3(x2), HiMD(x2), MD(1).
** This individual has moved to user "illconditioned" **

Offline oleg

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 835
  • Gender: Male
  • I'm a proud Jew
    • you can find me here
Re: Anyone making dead rats? Need some for AKG CK69s.
« Reply #8 on: June 08, 2007, 05:40:15 AM »
check with brenda from k-tek if they cam make you  softies in the lenght you need (if you are using the both tubes) or use regullar made for 416 if you use 1 only
oleg kaizerman(gebe)hollyland
kaizeroaudio-rentals -sound for film/tv sales

schoepses, gefells, sankens, sennheisers....all kind of shit ....ends with deva 16  fusion ,zfr,788, 744, hhb
http://groups.google.com/group/sellbuyexchange-film-videoaudiogear

Offline terrapinj

  • Jonesin' for Tunes
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 6553
  • Gender: Male
Re: Anyone making dead rats? Need some for AKG CK69s.
« Reply #9 on: June 08, 2007, 08:06:10 PM »
I'm trying to figure out how many pairs I want to get.  Need one for the short gun config, long gun config, and them maybe my TLs or normal 480 caps.

I'm such a girl . . . . I'm getting mine in different colors.   :P

:lol:
JW mod AKG 460b (ck61/ck63 or mk46/ck1x/ck3x)>  EAA PSP-2 > 722

Segue Dogstar XLRs and Interconnects

ISO: (2) ck2x

 

RSS | Mobile
Page created in 0.061 seconds with 38 queries.
© 2002-2024 Taperssection.com
Powered by SMF