hello all..im curious what you guys have to say about a problem i am having
my line in on my mini disc appears to be cutting one of my channels out when i record it only happens if i move the plug in around a bit in my pocket,,mostly its cut out a few times here and there but comes back,,but my most recent show i purposely moved the jack around hoping it would be static free or whatever...and i screwed the last 40 min of my show up cause the channel cut totally off on me
is there a way to fix the line in jack or what can i do?? my only thought so far is putting a little oil or some kind of lubricant on the jack plug in.. its like wetting it with your spit,,my cousn showed me that one..if u get static wet it with your tongue and its clean again without fuzzing out on ya... this appears to be the same somewhat..but im unsure what to do..
KY!!! anyone?? haha
i had a very similiar problem before.bigtime drop-outs during recording, and static. turns out it wasnt the jack on the MD, is was the jack on the BB,the mic jack.
what kind of power supply are you using? could it possibly be that?
if you have more than one BB, try them both to see if it still does it when you use a different one.( or even the mics too)
good reply there sir!!!! indeed i have made sure about this,,i have used different mics and its happened to me with both sets... and they both use different battery boxes... (core sound cards) and AT853S with the sound pros mini battery module)
i was matrixing in real time as well using both sets of mics
so u can imagine i was pissed off about this,,, all that trouble to sneak in dual gear and blah blah blah and then it cuts out..so at least my recording isnt really mono..its 2 mics that recorded the show..but only on the one side,,,i still sounds good..but thats bullcrap and i have to fix this line in on my md..its gotta be that...its happened with both sets of mics when i used them seperatly..so no,,its definatly the line in..
hmm what to do..what to do...