Topic: D8 power connecter type (Read 6,910 times)

phishn · « **on:** October 30, 2003, 09:00:58 PM »

Hi all,

What is the male power connecter end that plugs into a D8 dat? I'm trying to make a new cable and I believe its a "b" end but can't seem to get it to work.

Brian Skalinder · « **Reply #1 on:** October 31, 2003, 05:09:00 AM »

Ahem.

Check the archives.

phishn · « **Reply #2 on:** October 31, 2003, 05:13:06 AM »

Thanks for the link Brian...and for helping me out all over this board.

phishn · « **Reply #3 on:** October 31, 2003, 05:15:26 AM »

It is the B that i have with the right end. I'll redo the contacts..must be where its malfunctioning.

phishn · « **Reply #4 on:** October 31, 2003, 05:27:53 AM »

No need to redo. I had the adaptaplug backwards and all works. Just learned that some devices have the tip/ring reversed from others...like the UA-5.

Brian Skalinder · « **Reply #5 on:** October 31, 2003, 06:03:25 AM »

Quote from: phishn on October 31, 2003, 05:27:53 AM
No need to redo. I had the adaptaplug backwards and all works. Just learned that some devices have the tip/ring reversed from others...like the UA-5.

Glad you're all set. FWIW, the UA-5 is the only piece of gear I've seen with + ring, - tip. I'll never understand why they did it that way.

jhirte · « **Reply #6 on:** November 07, 2003, 05:16:22 PM »

D8 plug is 4.1mm. Rat shack has them. not sure if this is what yr after.
-Jim

Author Topic: D8 power connecter type (Read 6,910 times)

phishn

D8 power connecter type

Brian Skalinder

Re:D8 power connecter type

phishn

Re:D8 power connecter type

phishn

Re:D8 power connecter type

phishn

Re:D8 power connecter type

Brian Skalinder

Re:D8 power connecter type

jhirte

Re:D8 power connecter type