Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1] 2  All   Go Down

Author Topic: No levels on h120  (Read 7485 times)

0 Members and 1 Guest are viewing this topic.

Offline jonohull

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 264
  • Gender: Male
  • 12/10/07...
No levels on h120
« on: September 05, 2007, 05:52:38 PM »
I finally got all the pieces to my rig here, and I went to test it, but something's wrong. My set-up is JM27>UA-5>h120. I did the digimod on the UA-5 myself. I can see the red light coming out of the optical cable. Also, the peak light is lighting up, so I know the mics are fine. I just don't see any levels on the iRiver screen (it's Rockboxed). What could the problem be?
Logged

Offline Arni99

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 770
  • Gender: Male
Re: No levels on h120
« Reply #1 on: September 06, 2007, 06:06:30 AM »
Quote from: jonohull on September 05, 2007, 05:52:38 PM
I finally got all the pieces to my rig here, and I went to test it, but something's wrong. My set-up is JM27>UA-5>h120. I did the digimod on the UA-5 myself. I can see the red light coming out of the optical cable. Also, the peak light is lighting up, so I know the mics are fine. I just don't see any levels on the iRiver screen (it's Rockboxed). What could the problem be?
did you switch to optical-input in the iriver´s recording-settings?
Logged
1st: SONY PCM-M10 + DPA 4060's + DPA MPS 6030 power supply (microdot)
2nd: iPhone 5 + "Rode iXY" microphone/"Zoom IQ5" microphone

Offline petur

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 544
  • Gender: Male
  • wtb: time
Re: No levels on h120
« Reply #2 on: September 06, 2007, 06:33:24 AM »
recording settings -> Source
Logged

Offline jonohull

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 264
  • Gender: Male
  • 12/10/07...
Re: No levels on h120
« Reply #3 on: September 06, 2007, 08:09:49 AM »
Yes, I did that.
Logged

Offline homer420

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 75
Re: No levels on h120
« Reply #4 on: September 06, 2007, 12:31:06 PM »
Does recording analog-in work?
Logged
MBHO 603/KA200N's -> furtooli

Offline jonohull

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 264
  • Gender: Male
  • 12/10/07...
Re: No levels on h120
« Reply #5 on: September 06, 2007, 04:24:10 PM »
Quote from: homer420 on September 06, 2007, 12:31:06 PM
Does recording analog-in work?

Yeah, line in works with my stealth mics I have. The headphone monitor jack works on the UA-5.
Logged

Offline goatfarmer

  • Trade Count: (2)
  • Taperssection Regular
  • **
  • Posts: 225
  • Gender: Male
Re: No levels on h120
« Reply #6 on: September 06, 2007, 08:14:11 PM »
Do those mics require phantom power and if so, has the phantom power button on the UA-5 been activated/depressed so that it is lit?
Logged
To the optimist, the glass is half full.
To the pessimist, the glass is half empty.
To the engineer, the glass is twice as big as it needs to be.

Offline jonohull

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 264
  • Gender: Male
  • 12/10/07...
Re: No levels on h120
« Reply #7 on: September 06, 2007, 09:03:34 PM »
Quote from: goatfarmer on September 06, 2007, 08:14:11 PM
Do those mics require phantom power and if so, has the phantom power button on the UA-5 been activated/depressed so that it is lit?

Yeah, the mics work, and I can hear them through the monitor-out. The phantom power is turned on.
Logged

Offline cgrooves

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 804
  • Gender: Male
  • Get On the Bus -Busman Audio
Re: No levels on h120
« Reply #8 on: September 07, 2007, 06:56:53 AM »
Triple check that you have source set to digital on the iRiver.  What are your upper & lower thresholds set at for the range of the levels being displayed?  Set them to something narrow, like -12 & 0 and see if the levels show up.  If you have the red light at the end of the cable before you connect it to the recorder and the clip light is blinking occassionally on the UA-5 (and you can hear something through the monitor jack), I don't see why you wouldn't be getting levels on the iRiver.
Logged
AUDIO:
Open:  Busman Audio BSC1-(K1/K2/K3/K4) > Fostex FR-2LE (Busman T Mod) 
                       
Unopen:  AudioReality Omni Mics (Panasonic capsules)> AudioReality Battery Box (depending on SPL's) > iRiver H140 w/ Rockbox

VISUAL:
Canon 7D, Canon 50mm/1.8, Canon 85mm/1.8, Tamron 17-50mm/2.8, Tamron 70-200mm/2.8

Offline goatfarmer

  • Trade Count: (2)
  • Taperssection Regular
  • **
  • Posts: 225
  • Gender: Male
Re: No levels on h120
« Reply #9 on: September 07, 2007, 12:59:46 PM »
May be a lame question but you are plugging into the line IN on the iriver, not the line OUT, right?
Logged
To the optimist, the glass is half full.
To the pessimist, the glass is half empty.
To the engineer, the glass is twice as big as it needs to be.

Offline jonohull

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 264
  • Gender: Male
  • 12/10/07...
Re: No levels on h120
« Reply #10 on: September 07, 2007, 03:35:38 PM »
I doubled checked the input selection, and made sure I used the "In" jack. I set the thresholds narrower, and still nothing. Could it be something with Rockbox? I'll try a new build and see what happens.

Edit:
Ok, nothing is fixed, and now my backlight just flickers a lot. I switched to line-in and I can get a signal from the back outputs. Maybe it's something with the optical jack on the iRiver?
« Last Edit: September 07, 2007, 04:30:33 PM by jonohull »
Logged

Offline petur

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 544
  • Gender: Male
  • wtb: time
Re: No levels on h120
« Reply #11 on: September 08, 2007, 11:45:56 AM »
There are no know issues related optical recording with Rockbox.
Maybe reset your settings?

A flickering backlight doesn't sound very good though, maybe the unit has hardware issues?
As I have no h1x0, I can't help you more, maybe somebody at Rockbox (irc, forum) can help?

Peter
Logged

Offline jonohull

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 264
  • Gender: Male
  • 12/10/07...
Re: No levels on h120
« Reply #12 on: September 08, 2007, 03:25:51 PM »
Yeah, I guess I'll take it over to misticriver. The backlight was working fine before I upgraded Rockbox.
Logged

Offline jonohull

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 264
  • Gender: Male
  • 12/10/07...
Re: No levels on h120
« Reply #13 on: September 10, 2007, 03:58:29 PM »
I now notice that wen I tried recording something, the file size didn't go up. I jiggled the cable coming out of the UA-5, and the file size started growing, but still no levels. Maybe this is the area of the problem?
Logged

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9941
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: No levels on h120
« Reply #14 on: September 10, 2007, 04:01:54 PM »
Bad optical cable.  You will see light out of the end of the cable, but it won't pass signal...

I had one.  Everything was working right, but no levels.  Switched out cables, and it all worked just fine...

Terry

Logged
***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******
Pages: [1] 2  All   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.056 seconds with 39 queries.
© 2002-2025 Taperssection.com
Powered by SMF