Become a Site Supporter and Never see Ads again!

Author Topic: Best mics for bluegrass recording  (Read 6367 times)

0 Members and 2 Guests are viewing this topic.

Offline bluegrass_brad

  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 3592
  • Gender: Male
  • Old and in the way.
Re: Best mics for bluegrass recording
« Reply #15 on: October 16, 2007, 10:05:27 AM »
Stage lip for me has usually been less stressful as far as watching my gear. I personally usually run my cables off to the side of the stage so my gear is well out of the way of both patrons and the band (helps to have an extra set of cables sometimes for this). Another plus to it is that you can be right up front with great views and still see your gear and tend to it as needed.
CK1x, CK2x, CK3x > Hub Industry Cables > Naiant PFA or MK46 > 460B
CK1, CK8, CK63 > 460b

"That was back in a time when society was not quite ready for this music. Anyone remember those days? That's when punk rock was dangerous, right?" - Mike Ness

Offline wbrisette

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2855
  • Gender: Male
    • Homepage
Re: Best mics for bluegrass recording
« Reply #16 on: October 16, 2007, 10:36:47 AM »
Well you could like I did for a local band and loan them mics. I gave them my AT4040's to use on-stage, and I would pull those from the board. Of course I also had the advantage of attaching separate mics to their stands too, so I put a QTC-1's on each mic stand and used all four mics to get a very nice recording each week. But I suspect neither of these suggestions are going to work for you.

Wayne
Mics: Earthworks SR-77 (MP), QTC-1 (MP)

Editing: QSC RMX2450, MOTU 2408 MK3, Earthworks Sigma 6.2

 

RSS | Mobile
Page created in 0.057 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF