Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1] 2  All   Go Down

Author Topic: white noise with R-09  (Read 9050 times)

0 Members and 1 Guest are viewing this topic.

Offline ouzo

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 10
white noise with R-09
« on: October 17, 2007, 12:07:53 PM »
Hi,

a couple of days I taped a Metal show using a R-09.

I used SP-CMC-10 at the line in and low mic gain, AGC off, Low cut off.

I have about 5 years experience in taping concerts with TCD-D100. It mostly came out fine.

With the R-09 I got white noise all over the recording.

What's wrong? Did I use the wrong setting? Did I use the wrong SD-CArd which was a HAMA 2GB Highspeed?


Any suggestions?


Ralf
Logged

Offline vanark

  • TDS
  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 8950
  • If you ain't right, you better get right!
    • The Mudboy Grotto - North Mississippi Allstar fan site
Re: white noise with R-09
« Reply #1 on: October 17, 2007, 12:26:20 PM »
With or without a battery box?
Logged
If you have a problem relating to the Live Music Archive (http://www.archive.org/details/etree) please send an e-mail to us admins at LMA(AT)archive(DOT)org or post in the LMA thread here and we'll get on it. LMA FAQ: https://help.archive.org/help/live-music-archive-etree-org/

Link to LMA Recordings

Link to Team Dirty South Recordings on the LMA

Mics: Microtech Gefell M21 (with Nbob actives) | Church Audio CA-11 (cards) (with CA UBB)
Pres: babynbox
Recorders: Tascam DR-60D | Tascam DR-40 | Sony PCM-A10 | Edirol R-4

Offline ouzo

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 10
Re: white noise with R-09
« Reply #2 on: October 17, 2007, 01:10:25 PM »
I used SP-SPSB-2B.

No roll-off.


Ralf
Logged

Offline it-goes-to-eleven

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 6695
Re: white noise with R-09
« Reply #3 on: October 17, 2007, 01:35:05 PM »
Did you test at home before the show?

Does your r09 record  with the internal mics?

Have you ever made a recording on the r09?
Logged

Offline ouzo

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 10
Re: white noise with R-09
« Reply #4 on: October 17, 2007, 01:53:11 PM »
Yes I made 2 live recordings with SP-CMC-10 and battery box which were fine.

In addition I tested the internal mics which was fine, too

The recordings I made with AGC on. Might this be the reason?


Ralf

Logged

Offline it-goes-to-eleven

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 6695
Re: white noise with R-09
« Reply #5 on: October 17, 2007, 01:58:26 PM »
I have only heard bad things about the AGC.  So that may be the problem.
Logged

Offline ouzo

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 10
Re: white noise with R-09
« Reply #6 on: October 17, 2007, 02:24:58 PM »
Freelunch,

I got the problem with AGC off  ???

While it's on the recording was fine.


Ralf
Logged

Offline Liquid Drum

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 661
  • Gender: Male
Re: white noise with R-09
« Reply #7 on: October 17, 2007, 07:26:02 PM »
Hi Ralf,

Don't know if you remember me or not (Simon_LDT on DIME). We did a trade a while back. Your Saxon recordings are excellent.

Anyways, just some advice - Never use AGC. It makes the recordings real bad (pumping levels). Not sure what this noise is though, you got any samples so we can hear it?

Cheers,
Simon.
Logged
Mics:
AT933/C

Batt-Boxes, Pre-amps:
CA-9100

Recorders:
Edirol R-09
iRiver H120 (CF Modded)
Sony MZ-RH910 Hi-MD

Video: Canon HV20 E

Offline ouzo

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 10
Re: white noise with R-09
« Reply #8 on: October 18, 2007, 04:20:08 PM »
Hi Simon,

of course I remember you. What about another CD-R trade. Send me an e-mail  :)

Attached for you and all others you'll find a sample of Queensryche Langen; Germany 2007

This recording has been made with AGC off, manually leveled.

You'll find "easily" the noise I'm talking about.

Ralf
Logged

Offline it-goes-to-eleven

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 6695
Re: white noise with R-09
« Reply #9 on: October 18, 2007, 04:36:52 PM »
I'd look but I don't have an ogg decoder.  A small lossless sample is usually best.

Logged

Offline ouzo

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 10
Re: white noise with R-09
« Reply #10 on: October 18, 2007, 04:58:46 PM »
...and here are some seconds in WAV-format
Logged

Offline it-goes-to-eleven

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 6695
Re: white noise with R-09
« Reply #11 on: October 18, 2007, 05:03:36 PM »
Do you get it when recording at home?
Logged

Offline ouzo

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 10
Re: white noise with R-09
« Reply #12 on: October 18, 2007, 05:14:36 PM »
I made tests eighter with or without ACG at home. No noise at all.

I didn't format the card I used for Queensryche Langen by using the R-09. Could this be the cause?


Ralf
Logged

Offline it-goes-to-eleven

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 6695
Re: white noise with R-09
« Reply #13 on: October 18, 2007, 05:57:27 PM »
I really doubt drive formatting could impact this. I also don't think the card will have anything to do with it unless it has a very unusual electrical defect that causes interference.

While I wouldn't suggest any extensive wiggling of the delicate r09 input jack, maybe you have a cable or jack issue that only acts up when under pressure, etc.
Logged

Offline ead666

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 23
Re: white noise with R-09
« Reply #14 on: October 19, 2007, 12:45:33 AM »
Quote from: ouzo on October 18, 2007, 04:58:46 PM
...and here are some seconds in WAV-format

btw, nice sample Ralf  :laugh: :laugh:
Logged
Pages: [1] 2  All   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.054 seconds with 39 queries.
© 2002-2026 Taperssection.com
Powered by SMF