Topic: will AT8410a mounts fit on a Vark bar???

[mikesalvo]

is the threading the same size? anyone? anyone??

thanks!

[busterr]

I believe the Vark bar uses 3/8 threads, so you would probably need 3/8 > 5/8 thread adapters, unless of course your shockmounts came with a pair.
here's one from B&H: http://tinyurl.com/2o7bgy

[stevetoney]

Frankly, having adapters is something that EVERY taper should have ready access to in their gear bag. 

I always have a couple of 1/4-20 > 5/8 adapters and 3/8 > 5/8 adapters handy for when I need them. 

The 1/4-20 are for the top of a light stand and the 3/8 > 5/8 are for many of the t-bars that have 3/8 inch hardware. 

This also is universally handy for the top of light stands and mating with the vark bar although it's not directly related to the question you asked.

http://www.bhphotovideo.com/c/product/5357-REG/Bogen_Manfrotto_3102_5_8_Stud_to_3_8_.html

[mikesalvo]

ya I have some serious hardware shoppng to do. Unfortunately now is not the timel, as the holidays have drained my wallet. Soon enough though....