Become a Site Supporter and Never see Ads again!

Author Topic: Cards or Omnis?  (Read 8914 times)

0 Members and 1 Guest are viewing this topic.

Offline phil_fernandez

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 15
Cards or Omnis?
« on: March 05, 2008, 12:25:04 PM »
So I've got 12th row center seats at the Palace in Albany for moe. on Friday night.  I'm leaning towards using the omni caps on my CA11s.  Anyone have any thoughts on this?  Thanks!

Phil

Offline svenkid

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3564
  • Gender: Male
  • Take Time to Listen!
Re: Cards or Omnis?
« Reply #1 on: March 05, 2008, 12:46:33 PM »
cards, you don't want all the crowd on your tape do you?
Seriously, the band makes the music. Tapers just point mics in the right direction and hit "record".

That's good to hear!  The last patcher I had complained about my AKGs, fluffed schoeps for about 15 minutes, stayed patched in, and farted on me all night long.
rig: Neuman u89s > Lunatec V3 > MT(24)/JB3(16)
http://db.etree.org/svenkid

Um, in my room, one seam is a little off and I stare at it constantly. It's, like, destroying me.

Offline phil_fernandez

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 15
Re: Cards or Omnis?
« Reply #2 on: March 05, 2008, 03:02:29 PM »
The crowd noise issue crossed my mind, but I still was thinking the omnis would be better due to being up close.  Glad I asked.

Thanks for responding!

Offline BC

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2269
  • Gender: Male
  • Bongo Bongo
Re: Cards or Omnis?
« Reply #3 on: March 05, 2008, 04:28:39 PM »
I would run cards
In: DPA4022>V3>Microtracker/D8

Out: Morrison ELAD>Adcom GFA555mkII>Martin Logan Aerius i

Offline audBall

  • Trade Count: (38)
  • Needs to get out more...
  • Posts: 6565
  • Gender: Male
  • Feel brand new about it
Re: Cards or Omnis?
« Reply #4 on: March 05, 2008, 04:31:29 PM »
Running on a stand or on your person?


If on your person...
I'll play omni-advocate and say, run the omnis HRTF. 
mg m20.21.23 ■ akg ck61.62.63 »  nbob■naiant
aercomp2 ■ v2∞3 ■ sx-m2d2
pcm-d100 ■ pmd661 ■ r44ocm ■ f3

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
Re: Cards or Omnis?
« Reply #5 on: March 05, 2008, 05:12:44 PM »
Omni's

when you are that close the stage and pa volume will easily overwhelm the crowd noise. You can run omni's in far more circumstances than people realize.

besides which, it's moe. - there will be plenty of other nice and safe card tapes to enjoy later. With omni's that close you have a chance to make a different tape that could very well be a GREAT tape.

I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline Church-Audio

  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 7571
  • Gender: Male
Re: Cards or Omnis?
« Reply #6 on: March 05, 2008, 07:32:57 PM »
So I've got 12th row center seats at the Palace in Albany for moe. on Friday night.  I'm leaning towards using the omni caps on my CA11s.  Anyone have any thoughts on this?  Thanks!

Phil

Here are my thoughts. On this subject.

When your in a good sounding room and you are close to the sound source use omni mics. When your far away from the sound source use cardioid mics. I think for stage taping for example I would use a pair of spaced omni mics or omni mics with some kind of baffle * your head * or a jecklin disk * When you are close to the source, the crowd noise is not as much of an issue because the direct energy from the band/pa out overpowers the sound from the crowd around you. So you end up with a pretty clean tape. There are always exceptions to any rule though.

Chris
for warranty returns email me at
EMAIL Sales@church-audio.com

Offline setboy

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 5117
  • Gender: Male
Re: Cards or Omnis?
« Reply #7 on: March 05, 2008, 07:37:51 PM »
cards, you don't want all the crowd on your tape do you?

that's right. Because we all know cards never pick up crowd ::) ;)


Edit: run the omnis

Offline bluntforcetrauma

  • Trade Count: (11)
  • Taperssection Member
  • ***
  • Posts: 878
  • Gender: Male
    • http://themovementschool.org
Re: Cards or Omnis?
« Reply #8 on: March 05, 2008, 07:56:35 PM »
I would run cards.

maybe up to 5 th row run omni's.  Just my personal experience.  I run omni's up to 5th row even at 40,000 person concert.  I tend to run cards for everything else.  Even for recent Van Halen i ran cards from 12th row for 2 nights.  I just dont even like the crowd noise in between songs with omni's unless I am really close--just a personal thing

nameloc01

  • Guest
  • Trade Count: (0)
Re: Cards or Omnis?
« Reply #9 on: March 05, 2008, 07:57:33 PM »
Cards would be best. Given you run them properly.

Offline philfernandez

  • Trade Count: (1)
  • Taperssection Newbie
  • *
  • Posts: 23
  • Gender: Male
Re: Cards or Omnis?
« Reply #10 on: March 05, 2008, 09:21:29 PM »
So it looks like the omnis will be the choice.  I will be using a stand and have a couple different mounts.  For those of you who suggested using cards, which method would be best?  My inclination would be ORTF.

Thanks again for all the guidance.  Thanks also to Chris Church for some nice gear.

Offline mblindsey

  • Trade Count: (23)
  • Taperssection All-Star
  • ****
  • Posts: 1245
Re: Cards or Omnis?
« Reply #11 on: March 05, 2008, 10:06:32 PM »
cards, you don't want all the crowd on your tape do you?

that's right. Because we all know cards never pick up crowd ::) ;)


Edit: run the omnis

The answer is:  "it depends".

Hear my cards 12-15 ft from the stage, pointing right at the PA speakers, 10 ft up, front of the board, with a "lip" to deflect what is behind me:

http://taperssection.com/index.php/topic,100075.0.html

A lot of chatter...

I guess I need shotguns for that venue  ;)

--Michael
« Last Edit: March 05, 2008, 10:14:51 PM by mblindsey »
Mics:  Microtech Gefell m200/M20/nBob Actives>PFA, CA-11
Pre's: USB Pre2, 1x V3, 2x V3 w/optimod, MP2, Church Ugly
Decks: SD MixPre 6 II, R44 Oade Concert Mod, M10
Playback: Grace m9xx->Sen HD 650, Fostex TH-X00, HIFIMAN HEXX
Mixing: RME Fireface UFX->Reaper/Izotope->Yamaha HS8

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
Re: Cards or Omnis?
« Reply #12 on: March 05, 2008, 10:25:22 PM »
The answer is:  "it depends".

Hear my cards 12-15 ft from the stage, pointing right at the PA speakers, 10 ft up, front of the board, with a "lip" to deflect what is behind me:

http://taperssection.com/index.php/topic,100075.0.html

A lot of chatter...

I guess I need shotguns for that venue  ;)

--Michael

taping a band in a bar with the requisite sized PA is different than taping moe. with a substantial PA in a theater
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline setboy

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 5117
  • Gender: Male
Re: Cards or Omnis?
« Reply #13 on: March 05, 2008, 10:35:37 PM »
The answer is:  "it depends".

Hear my cards 12-15 ft from the stage, pointing right at the PA speakers, 10 ft up, front of the board, with a "lip" to deflect what is behind me:

http://taperssection.com/index.php/topic,100075.0.html

A lot of chatter...

I guess I need shotguns for that venue  ;)

--Michael

taping a band in a bar with the requisite sized PA is different than taping moe. with a substantial PA in a theater


what he said. and i have made some pertty chatty shotgun tapes before

Offline mblindsey

  • Trade Count: (23)
  • Taperssection All-Star
  • ****
  • Posts: 1245
Re: Cards or Omnis?
« Reply #14 on: March 05, 2008, 10:38:51 PM »
The answer is:  "it depends".

Hear my cards 12-15 ft from the stage, pointing right at the PA speakers, 10 ft up, front of the board, with a "lip" to deflect what is behind me:

http://taperssection.com/index.php/topic,100075.0.html

A lot of chatter...

I guess I need shotguns for that venue  ;)

--Michael

taping a band in a bar with the requisite sized PA is different than taping moe. with a substantial PA in a theater

Agreed.  Touche +T
Mics:  Microtech Gefell m200/M20/nBob Actives>PFA, CA-11
Pre's: USB Pre2, 1x V3, 2x V3 w/optimod, MP2, Church Ugly
Decks: SD MixPre 6 II, R44 Oade Concert Mod, M10
Playback: Grace m9xx->Sen HD 650, Fostex TH-X00, HIFIMAN HEXX
Mixing: RME Fireface UFX->Reaper/Izotope->Yamaha HS8

 

RSS | Mobile
Page created in 0.054 seconds with 39 queries.
© 2002-2025 Taperssection.com
Powered by SMF