Become a Site Supporter and Never see Ads again!

Author Topic: Attaching Manfrotto 099B and 196 extensions to a Superclamp?  (Read 4664 times)

0 Members and 1 Guest are viewing this topic.

Offline mysticeyes

  • Trade Count: (21)
  • Taperssection Regular
  • **
  • Posts: 194
I've got a Manfrotto extension rod (099B) and a three-piece articulating arm (196). It looks like the 196 comes with two built-in spigots that slide into the slot in the Superclamp and can be held in place with the set screw, but that's probably not the approved way to do it  :).

So, what parts do I need to attach these to the Superclamp? Any help appreciated, thank you.

Offline vanark

  • TDS
  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 8856
  • If you ain't right, you better get right!
    • The Mudboy Grotto - North Mississippi Allstar fan site
Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
« Reply #1 on: July 04, 2012, 12:45:27 PM »
I've got a Manfrotto extension rod (099B) and a three-piece articulating arm (196). It looks like the 196 comes with two built-in spigots that slide into the slot in the Superclamp and can be held in place with the set screw, but that's probably not the approved way to do it  :).

Why wouldn't that work for the articulating arm?  I've always done it this way.

for the 099B, I secure it to the superclamp stud - works like a charm.  Do you have the stud?

If you have a problem relating to the Live Music Archive (http://www.archive.org/details/etree) please send an e-mail to us admins at LMA(AT)archive(DOT)org or post in the LMA thread here and we'll get on it.

Link to LMA Recordings

Link to Team Dirty South Recordings on the LMA

Mics: Microtech Gefell M21 (with Nbob actives) | Church Audio CA-11 (cards) (with CA UBB)
Pres: babynbox
Recorders: Tascam DR-60D | Tascam DR-40 | Sony PCM-A10 | Edirol R-4

Offline mysticeyes

  • Trade Count: (21)
  • Taperssection Regular
  • **
  • Posts: 194
Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
« Reply #2 on: July 04, 2012, 12:55:42 PM »
Thanks, vanark. I believe I see it now.
The articulating arm attaches by one of its spigots, just like I've tried it.
And I've got the stud, the hexagonal piece with a 1/4" screw at the end. I just tried securing the stud to the bottom of the 099B, tightening it with the set screw, and then the stud slides into the clamp. Great!
Thanks again.

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
« Reply #3 on: July 04, 2012, 01:37:24 PM »
Why wouldn't that work for the articulating arm?  I've always done it this way.

+1

I've got the bigger 396 and thats what I do. Thats not the only way to run it, but it's the safest way.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline spyder9

  • Trade Count: (83)
  • Needs to get out more...
  • *****
  • Posts: 13291
  • Gender: Male
  • "Are you Zman?"
    • My Archived shows
Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
« Reply #4 on: July 06, 2012, 07:21:26 PM »
I used the 196 + superclamp at Alpine Valley last weekend.  Clamped to the SBD doohick.  Perfect match. 

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4654
  • Gender: Male
  • Spreadicated
Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
« Reply #5 on: July 07, 2012, 05:51:44 PM »
My superclamp has a stud with threads on each side and doesn't fit my Manfrotto 099B.  Can some one link a stud that works with the Manfrotto extension pole??  TIA

Edit:  I modified my stud by taking off the 1/4 thread and it fits like a glove now!! 
« Last Edit: July 07, 2012, 08:42:48 PM by jmbell »
Mics: DPA ST4011ER, 4018ER | Neumann kk 184, kk 185 > Nbob/PFA | Schoeps mk41 > KCY 250/ 5 Ig > PFA
Preamps: DPA MMA 6000
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline mysticeyes

  • Trade Count: (21)
  • Taperssection Regular
  • **
  • Posts: 194
Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
« Reply #6 on: July 07, 2012, 07:20:15 PM »
I ordered my Superclamp with a stud with a single 1/4" screw thread at the end that fits into the 099B, as advised above. It's a Manfrotto part that you can get from B&H, etc.
« Last Edit: July 07, 2012, 07:21:53 PM by mysticeyes »

 

RSS | Mobile
Page created in 0.05 seconds with 31 queries.
© 2002-2025 Taperssection.com
Powered by SMF