Become a Site Supporter and Never see Ads again!

Author Topic: Attaching Manfrotto 099B and 196 extensions to a Superclamp?  (Read 5422 times)

0 Members and 1 Guest are viewing this topic.

Offline mysticeyes

  • Trade Count: (21)
  • Taperssection Regular
  • **
  • Posts: 194
I've got a Manfrotto extension rod (099B) and a three-piece articulating arm (196). It looks like the 196 comes with two built-in spigots that slide into the slot in the Superclamp and can be held in place with the set screw, but that's probably not the approved way to do it  :).

So, what parts do I need to attach these to the Superclamp? Any help appreciated, thank you.

Offline vanark

  • TDS
  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 8967
  • If you ain't right, you better get right!
    • The Mudboy Grotto - North Mississippi Allstar fan site
Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
« Reply #1 on: July 04, 2012, 12:45:27 PM »
I've got a Manfrotto extension rod (099B) and a three-piece articulating arm (196). It looks like the 196 comes with two built-in spigots that slide into the slot in the Superclamp and can be held in place with the set screw, but that's probably not the approved way to do it  :).

Why wouldn't that work for the articulating arm?  I've always done it this way.

for the 099B, I secure it to the superclamp stud - works like a charm.  Do you have the stud?

If you have a problem relating to the Live Music Archive (http://www.archive.org/details/etree) please send an e-mail to us admins at LMA(AT)archive(DOT)org or post in the LMA thread here and we'll get on it. LMA FAQ: https://help.archive.org/help/live-music-archive-etree-org/

Link to LMA Recordings

Link to Team Dirty South Recordings on the LMA

Mics: Microtech Gefell M21 (with Nbob actives) | Church Audio CA-11 (cards) (with CA UBB)
Pres: babynbox
Recorders: Tascam DR-60D | Tascam DR-40 | Sony PCM-A10 | Edirol R-4

Offline mysticeyes

  • Trade Count: (21)
  • Taperssection Regular
  • **
  • Posts: 194
Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
« Reply #2 on: July 04, 2012, 12:55:42 PM »
Thanks, vanark. I believe I see it now.
The articulating arm attaches by one of its spigots, just like I've tried it.
And I've got the stud, the hexagonal piece with a 1/4" screw at the end. I just tried securing the stud to the bottom of the 099B, tightening it with the set screw, and then the stud slides into the clamp. Great!
Thanks again.

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
« Reply #3 on: July 04, 2012, 01:37:24 PM »
Why wouldn't that work for the articulating arm?  I've always done it this way.

+1

I've got the bigger 396 and thats what I do. Thats not the only way to run it, but it's the safest way.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline spyder9

  • Trade Count: (84)
  • Needs to get out more...
  • *****
  • Posts: 13329
  • Gender: Male
  • "Are you Zman?"
    • My Archived shows
Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
« Reply #4 on: July 06, 2012, 07:21:26 PM »
I used the 196 + superclamp at Alpine Valley last weekend.  Clamped to the SBD doohick.  Perfect match. 

Online jbell

  • Team Dirty South
  • Trade Count: (152)
  • Needs to get out more...
  • *****
  • Posts: 4770
  • Gender: Male
  • Spreadicated
Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
« Reply #5 on: July 07, 2012, 05:51:44 PM »
My superclamp has a stud with threads on each side and doesn't fit my Manfrotto 099B.  Can some one link a stud that works with the Manfrotto extension pole??  TIA

Edit:  I modified my stud by taking off the 1/4 thread and it fits like a glove now!! 
« Last Edit: July 07, 2012, 08:42:48 PM by jmbell »
4 Channels
Neumann kk 184's, kk 185's > Nbob KCY > Naiant PFA | Schoeps mk41's > KCY 250/ 05 Ig > Naiant PFA > Sound Devices Mixpre 10 II @32/48

2 Channels
Schoeps mk41's > KCY 250/ 05 Ig > Riotbox > Sony PCM A10 @ 24/48

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline mysticeyes

  • Trade Count: (21)
  • Taperssection Regular
  • **
  • Posts: 194
Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
« Reply #6 on: July 07, 2012, 07:20:15 PM »
I ordered my Superclamp with a stud with a single 1/4" screw thread at the end that fits into the 099B, as advised above. It's a Manfrotto part that you can get from B&H, etc.
« Last Edit: July 07, 2012, 07:21:53 PM by mysticeyes »

 

RSS | Mobile
Page created in 0.045 seconds with 31 queries.
© 2002-2026 Taperssection.com
Powered by SMF