Become a Site Supporter and Never see Ads again!

Author Topic: Clamp-aholics. The ultimate clamping and rigging team thread II  (Read 22421 times)

0 Members and 1 Guest are viewing this topic.

Offline goodcooker

  • (38)
  • Needs to get out more...
  • *****
  • Posts: 3499
  • Gender: Male
  • goes to 11
Re: Clamp-aholics. The ultimate clamping and rigging team thread II
« Reply #30 on: June 19, 2018, 02:57:38 PM »


Used the super clamp+telescopic extension for the first time last night. The clamp could only latch on in a way that caused the pole to be at an angle. Is there any way to avoid this with a superclamp or would a c clamp be the way to get it up perpendicular to the ledge?

Superclamps typically come with a wedge insert that allows it to clamp flat to a table top. I always lose that insert and have to wing it.

A lot of people prefer a Matthelini type jaw clamp for flat surfaces.
Joly Mod Oktava MK012 || NakCM300 || ADK A51 > Sound Devices 442 || Reference Audio Designs MS2 > Tascam DR701d || Zoom F6
Transfers - Tascam DA30 or Fostex D5 (dats) or Nak MR2 (cassettes) > Sound Devices USB Pre

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline jcable77

  • (23)
  • Taperssection All-Star
  • ****
  • Posts: 1058
  • Gender: Male
  • Needs to stay in more...
Re: Clamp-aholics. The ultimate clamping and rigging team thread II
« Reply #31 on: June 19, 2018, 06:39:31 PM »


Used the super clamp+telescopic extension for the first time last night. The clamp could only latch on in a way that caused the pole to be at an angle. Is there any way to avoid this with a superclamp or would a c clamp be the way to get it up perpendicular to the ledge?
This is what i would use and works great in that situation. Ive had the same issue, even with the wedge in the superclamp.
https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiCj5-S5eDbAhXRtcAKHfVPBZ0YABAIGgJpbQ&ohost=www.google.com&cid=CAESQOD2cBbd6HlybuaLcGkm7fo9C6UT431KyU8V5C257vMIqiUHPGP-d3KxVjC2PEV4EqTnF7L9QWnrySyAkO0Mwdw&sig=AOD64_0l_RbK56baWAlEuV9xIc2AnraPzQ&ctype=5&q=&ved=0ahUKEwj0t5WS5eDbAhUs3IMKHc3BBUwQwg8IJg&adurl=

« Last Edit: June 19, 2018, 06:42:33 PM by jcable77 »
AKG or ADK>Sound Devices

Offline rigpimp

  • (14)
  • Needs to get out more...
  • *****
  • Posts: 2445
  • Gender: Male
  • Jarts don't kill people!
Re: Clamp-aholics. The ultimate clamping and rigging team thread II
« Reply #32 on: June 19, 2018, 06:47:22 PM »
If you lose the rubber insert superclamps are good for round rails, use a flat C-clamp like a Rowi for tables and lips. 
Mics: Schoeps MK5 G MP, Schoeps CCM 4 Lg MP, Schoeps MK8 MP, nBob cables > PFA, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2-LS, E.A.A. PSP-2, Naiant Tinybox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6, Sony PCM-M10
Playback: McIntosh MC 2105 > McIntosh MX 130 > Von Schweikert VR-4 JR
http://archive.org/bookmarks/kskreider
https://archive.org/details/thespps

Online vanark

  • TDS
  • (29)
  • Needs to get out more...
  • *****
  • Posts: 7645
  • If you ain't right, you better get right!
    • The Mudboy Grotto - North Mississippi Allstar fan site
Re: Clamp-aholics. The ultimate clamping and rigging team thread II
« Reply #33 on: June 19, 2018, 06:51:48 PM »
If you lose the rubber insert superclamps are good for round rails, use a flat C-clamp like a Rowi for tables and lips.

You can buy a 4 pack of the wedges if you lose one and need a replacement.
If you have a problem relating to the Live Music Archive (http://www.archive.org/details/etree) please send an e-mail to us admins at etree(AT)archive(DOT)org or post in the LMA thread here and we'll get on it.

Link to LMA Recordings

Link to Team Dirty South Recordings on the LMA

Mics: Microtech Gefell M21 (with Nbob actives) | Church Audio CA-11 (cards) (with CA UBB)
Pres: <empty>
Recorders: Tascam DR-60D | Tascam DR-40 | Sony PCM-A10

Offline ycoop

  • (8)
  • Taperssection Member
  • ***
  • Posts: 587
  • Gender: Male
Re: Clamp-aholics. The ultimate clamping and rigging team thread II
« Reply #34 on: June 19, 2018, 07:08:19 PM »


Used the super clamp+telescopic extension for the first time last night. The clamp could only latch on in a way that caused the pole to be at an angle. Is there any way to avoid this with a superclamp or would a c clamp be the way to get it up perpendicular to the ledge?
This is what i would use and works great in that situation. Ive had the same issue, even with the wedge in the superclamp.
https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiCj5-S5eDbAhXRtcAKHfVPBZ0YABAIGgJpbQ&ohost=www.google.com&cid=CAESQOD2cBbd6HlybuaLcGkm7fo9C6UT431KyU8V5C257vMIqiUHPGP-d3KxVjC2PEV4EqTnF7L9QWnrySyAkO0Mwdw&sig=AOD64_0l_RbK56baWAlEuV9xIc2AnraPzQ&ctype=5&q=&ved=0ahUKEwj0t5WS5eDbAhUs3IMKHc3BBUwQwg8IJg&adurl=

Thanks for the link, I was having trouble finding a clamp with an opening larger than 2”. That price is pretty steep though  :-\
Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Offline heathen

  • (23)
  • Needs to get out more...
  • *****
  • Posts: 3202
Re: Clamp-aholics. The ultimate clamping and rigging team thread II
« Reply #35 on: June 19, 2018, 07:10:37 PM »
Gear that enables you to set up in the ideal location is worth the expense, IMO.
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 | CA-14 omni Pres: CA9200 | DPA d:vice Decks: Zoom F8 | Roland R-05

Online vanark

  • TDS
  • (29)
  • Needs to get out more...
  • *****
  • Posts: 7645
  • If you ain't right, you better get right!
    • The Mudboy Grotto - North Mississippi Allstar fan site
Re: Clamp-aholics. The ultimate clamping and rigging team thread II
« Reply #36 on: June 19, 2018, 07:46:56 PM »
I think I use the Manfrotto quick release more than any other clamp. Although I use superclamps a fair bit too, esp. on round rails.
If you have a problem relating to the Live Music Archive (http://www.archive.org/details/etree) please send an e-mail to us admins at etree(AT)archive(DOT)org or post in the LMA thread here and we'll get on it.

Link to LMA Recordings

Link to Team Dirty South Recordings on the LMA

Mics: Microtech Gefell M21 (with Nbob actives) | Church Audio CA-11 (cards) (with CA UBB)
Pres: <empty>
Recorders: Tascam DR-60D | Tascam DR-40 | Sony PCM-A10

Offline jcable77

  • (23)
  • Taperssection All-Star
  • ****
  • Posts: 1058
  • Gender: Male
  • Needs to stay in more...
Re: Clamp-aholics. The ultimate clamping and rigging team thread II
« Reply #37 on: June 19, 2018, 08:48:29 PM »


Used the super clamp+telescopic extension for the first time last night. The clamp could only latch on in a way that caused the pole to be at an angle. Is there any way to avoid this with a superclamp or would a c clamp be the way to get it up perpendicular to the ledge?
This is what i would use and works great in that situation. Ive had the same issue, even with the wedge in the superclamp.
https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiCj5-S5eDbAhXRtcAKHfVPBZ0YABAIGgJpbQ&ohost=www.google.com&cid=CAESQOD2cBbd6HlybuaLcGkm7fo9C6UT431KyU8V5C257vMIqiUHPGP-d3KxVjC2PEV4EqTnF7L9QWnrySyAkO0Mwdw&sig=AOD64_0l_RbK56baWAlEuV9xIc2AnraPzQ&ctype=5&q=&ved=0ahUKEwj0t5WS5eDbAhUs3IMKHc3BBUwQwg8IJg&adurl=

Thanks for the link, I was having trouble finding a clamp with an opening larger than 2”. That price is pretty steep though  :-\
Think i found one on ebay a ways back around 35. It really was worth it. I use it all the time.
AKG or ADK>Sound Devices

mfrench

  • Guest
  • (0)
Re: Clamp-aholics. The ultimate clamping and rigging team thread II
« Reply #38 on: June 20, 2018, 09:41:04 AM »
clamping to clamps

Offline ycoop

  • (8)
  • Taperssection Member
  • ***
  • Posts: 587
  • Gender: Male
Re: Clamp-aholics. The ultimate clamping and rigging team thread II
« Reply #39 on: June 20, 2018, 03:01:23 PM »
I ended up going with 6” wide jaw impact brand Matthellini type clamp that I found used (open box) on Amazon for $35.
Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Online vanark

  • TDS
  • (29)
  • Needs to get out more...
  • *****
  • Posts: 7645
  • If you ain't right, you better get right!
    • The Mudboy Grotto - North Mississippi Allstar fan site
Re: Clamp-aholics. The ultimate clamping and rigging team thread II
« Reply #40 on: June 21, 2018, 09:36:48 PM »
I ended up going with 6” wide jaw impact brand Matthellini type clamp that I found used (open box) on Amazon for $35.

That's a good deal.
If you have a problem relating to the Live Music Archive (http://www.archive.org/details/etree) please send an e-mail to us admins at etree(AT)archive(DOT)org or post in the LMA thread here and we'll get on it.

Link to LMA Recordings

Link to Team Dirty South Recordings on the LMA

Mics: Microtech Gefell M21 (with Nbob actives) | Church Audio CA-11 (cards) (with CA UBB)
Pres: <empty>
Recorders: Tascam DR-60D | Tascam DR-40 | Sony PCM-A10

Online jbell

  • TDS
  • (144)
  • Needs to get out more...
  • *****
  • Posts: 4215
  • Gender: Male
  • Spreadicated
Re: Clamp-aholics. The ultimate clamping and rigging team thread II
« Reply #41 on: July 26, 2018, 05:34:49 PM »
Can anyone share the link to the legs that can be attached to a Manfrotto 099b extension pole??  I can seem to find it searching B&H
Microtech Gefell m20's> Nbob KCY> Naiant PFA(60v) or AKG ck61's & ck63's> Naiant Actives> Sound Devices Mixpre-6 @24/48

-22        -12         -6        TDS     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%


Offline rippleish20

  • (22)
  • Taperssection All-Star
  • ****
  • Posts: 1002
Schoeps CMC6 (MK22's) / AKG C480B (ck61, ck63, ck8) /  Neumann KM100 (AK40, AK50) / Audio Technica AT4050ST/ AT853s  (cardiod, omni) / CA-14 (cardiod) / CA-11 (Omni) /
Mixpre-10t / Mixpre-6 / Roland R-07 /Tascam DR-100mkIII /

Online jbell

  • TDS
  • (144)
  • Needs to get out more...
  • *****
  • Posts: 4215
  • Gender: Male
  • Spreadicated
Microtech Gefell m20's> Nbob KCY> Naiant PFA(60v) or AKG ck61's & ck63's> Naiant Actives> Sound Devices Mixpre-6 @24/48

-22        -12         -6        TDS     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

 

RSS | Mobile
Page created in 0.069 seconds with 44 queries.
© 2002-2020 Taperssection.com
Powered by SMF