Become a Site Supporter and Never see Ads again!

Author Topic: Sound Devices MixPre-3 and 6, Part 7  (Read 10813 times)

0 Members and 1 Guest are viewing this topic.

Offline justink

  • (4)
  • Taperssection All-Star
  • ****
  • Posts: 1953
  • Gender: Male
Re: Sound Devices MixPre-3 and 6, Part 7
« Reply #90 on: February 01, 2021, 10:12:56 PM »
i imagine. whenever ive run out of power the last file is always there

Hope so.  Oops. If not, certainly a learning lesson.  I was just in such a hurry to break down and get out.

I wanted to work on the tape and upload while on the road.  Guess I have to wait a week to see if I have a full tape to work with.  🤷🏻‍♂️
Mics:
DPA 4023 (Cardioid)
DPA 4028 (Subcardioid)
DPA 4018V (Supercardioid)
Earthworks TC25 (Omni) 

Pres and A/D's:
Grace Design Lunatec V3 (Oade ACM)
Edirol UA-5 (bm2p+ Mod)

Recorders:
Sound Devices MixPre10 II
Edirol R-44 (Oade CM)
Sony PCM‑M10

Offline morst

  • (2)
  • Needs to get out more...
  • *****
  • Posts: 4342
  • Hey Now!
    • #twitterSUCKS
Re: Sound Devices MixPre-3 and 6, Part 7
« Reply #91 on: February 06, 2021, 03:12:46 AM »
It *does* work for the original MixPre series, at least with the model 3. I have been using it as an audio interface to run SMAART tools on an iPad Pro.

Some comments:

- Avoid using the Lightning camera adaptor. It provides very flaky power and it causes trouble like the MixPre restarting repeteadly. Unintuitively, you should always
use the USB-A port in the MixPre with a normal USB-Lightning cable for the iPhone/iPad.

- Some iOS applications support multi channel audio (these recorders are class compliant USB devices so they won't need any driver). THe MixPre can happily
accomodate both.

If the app supports multichannel audio, use System->USB Audio->Normal. If it is limited to stereo, System->USB Audio->Stereo. Pretty straightforward.


These are FANTASTIC tips. Thank you.
UNINTUITIVELY is right, I assumed that the USB-A port was only for keyboards or controllers. Have tried nothing else there.
Merrick Garland *was* a compromise, and just look.

 

RSS | Mobile
Page created in 0.032 seconds with 30 queries.
© 2002-2021 Taperssection.com
Powered by SMF