Become a Site Supporter and Never see Ads again!

Author Topic: Sony PMC7040 DAT Question  (Read 1375 times)

0 Members and 1 Guest are viewing this topic.

Offline tourtelot

  • (2)
  • Taperssection Regular
  • **
  • Posts: 67
  • Seattle, WA
Sony PMC7040 DAT Question
« on: May 21, 2020, 05:17:56 PM »
I know. DAT? Really?

A retiring friend is selling his stuff and it included a really minty Sony PCM 7040 studio time code DAT. He's not looking for a lot of money but before we can sell this thing, we sorta have to know it works as it should.

So it seems to handle tape well and records, plays back, syncs TC, all good things. But there is a light on the "error strip" labeled Playback Condition.

The manual seems to indicate that if this light is lit, it indicates a problem. But every DAT that I have played back, all of which sound perfect (no drop outs, no artifacts, nothing out of the ordinary) show a solid lit Playback Condition lamp.

If any one has recent experience with this machine and could tell me if this solid lamp shows an error(s) or if the error(s) would be shown by a flashing lamp (which I might suspect to be the case) and a solid lit lamp shows correct functioning.

Or any place I could put this question with some different eyes.

Thanks tons!

Stay safe and be well.

D.
Douglas Tourtelot, CAS
Seattle, WA

Offline jerryfreak

  • (31)
  • Needs to get out more...
  • *****
  • Posts: 5485
  • The plural of anecdote is not data
Re: Sony PMC7040 DAT Question
« Reply #1 on: May 21, 2020, 06:45:34 PM »
IIRC, per the manual the light can be set to alert that the deck is either interpolating or muting misread samples

so it’s basically an error counter, but that doesn’t tell you what the problem is. i imagine a cleaning and alignment would be in order. hard to troubleshoot read errors without the proper test tapes and a scope
People whose posts I wont see:
 capnhook, daspyknows, Melanie, morst, Rob D., Scooter123, Sloan Simpson, Walstib62, Dr. Bickart

Offline H₂O

  • (28)
  • Needs to get out more...
  • *****
  • Posts: 5693
  • Gender: Male
Re: Sony PMC7040 DAT Question
« Reply #2 on: May 22, 2020, 05:15:59 PM »
If the deck has been in storage also check the pinch roller
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline Scooter123

  • "I am not an alcoholic. I am a drunk. Drunks don't go to meetings."
  • (9)
  • Taperssection All-Star
  • ****
  • Posts: 1990
Re: Sony PMC7040 DAT Question
« Reply #3 on: June 06, 2020, 02:47:40 AM »
I used it and its predecessor (7038) extensively for well over 1,000 DAT transcriptions in 2017-18 for a radio station.  Its a friggin beast (50 lbs+), and a solid machine, much more than one needs for simple transcriptions, with all sorts of whistles buzzers and bells.  I own both.  The difference is minor, perhaps having to do with a remote.  I'm not sure. 

I will say this that if you run a couple hundred old DATs through this thing, you will need to get it serviced.  Here in LA, there is an Armenian guy on Hollywood Way in Burbank adjacent or maybe North Hollywood in a dumpy strip mall that will bring it up to factory specs for $100-150, mainly cleaning and belts, but way beyond my skill set.  PM me if you want the name. 

It is in my opinion, it is the finest DAT machine ever made, and was used by many of the radio stations and studios here in LA before digital drives.  I think it cost well over $5,000  in the day.  In used condition, I would not pay over $200 for it, because I think no matter what, it will need servicing. 
Regards,

Scooter123

mk41 > N Box  > Sony M-10
mk4 > N Box > Sony M-10

 

RSS | Mobile
Page created in 0.037 seconds with 32 queries.
© 2002-2020 Taperssection.com
Powered by SMF