Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: RX declip and further processing  (Read 4150 times)

0 Members and 4 Guests are viewing this topic.

Offline colargol

  • Trade Count: (10)
  • Taperssection Regular
  • **
  • Posts: 186
RX declip and further processing
« on: September 15, 2025, 10:40:56 AM »
Hi!
I am sure I read in some thread here a while ago about using the declip function in RX, and then running some other procedure after to get rid of remaining distortion (?), but I cannot find the topic anywhere... Anyone else know what I am looking for?
-colargol
Logged
MK4s/MK41s > nbob actives > tinybox/babynbox/riotbox > M10/A10/PR-2

Offline robgronotte

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 397
Re: RX declip and further processing
« Reply #1 on: September 18, 2025, 01:00:29 AM »
I'm not sure if it's been discussed before, but I'm interested. I've tried to use the function several times. One time it worked very well. But the other times I have tried I've gotten very little to no improvement. If anyone has expertise with this function it would be great to hear from you.
Logged

Offline EmRR

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 848
    • ElectroMagnetic Radiation Recorders
Re: RX declip and further processing
« Reply #2 on: September 18, 2025, 09:21:01 AM »
Sometimes de-click works better. Use the “output clicks/etc only” option to hear exactly what’s being removed.

De-clip will generate a file with higher level, sometimes much higher, so assess if you need to lower gain. 
Logged
Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN, Rode NT-FS1.
Recorders: Zoom F8n, Sony MZ-R50

Offline capnhook

  • All your llamas are belong to us....
  • Site Supporter
  • Trade Count: (20)
  • Needs to get out more...
  • *
  • Posts: 5238
  • All your llamas are belong to us....
Re: RX declip and further processing
« Reply #3 on: September 18, 2025, 10:22:00 AM »


Assuming you are 24 bit, amplify -10dB then apply declip

Amplify to taste next
Logged
Proud member of the reality-based community

BSCS-L->JB-mod [NAK CM-300 (CP-3) and/or (CP-1)]->LSD2->CA CAFS-Omni->Sony ECM-907**Apogee MiniMe Rev. C->CA Ugly II->**Edirol OCM R-44->Tascam DR-22WL->Sony TCD-D8


"Don't ever take an all or nothing attitude when it comes to making a difference
and being beautiful and making the world a beautiful place through your actions.
Every little bit is registered.  Every little bit.  So be as beautiful as you can as often as you can"

"It'll never be over, 'till we learn."
 
"My dream is to get a bus and get the band and just go coast to coast. Just about everything else except music, is anti-musical.  That's it.  Music's the thing." - Jeb Puryear
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.046 seconds with 28 queries.
© 2002-2025 Taperssection.com
Powered by SMF