Become a Site Supporter and Never see Ads again!

Author Topic: ck61 Internal Metal Screen - Defect?  (Read 5863 times)

0 Members and 1 Guest are viewing this topic.

Offline ford prefect

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 553
  • Gender: Male
ck61 Internal Metal Screen - Defect?
« on: December 05, 2005, 09:58:14 PM »
Recently got a new pair of ck61's, and the first thing I noticed upon examining the caps is that the internal metal screen protecting 1 of the 2 seems to be offcenter on one of the 3 sides (see picture below).  The center section has a little silver strip that looks like adhesive, and the seam is visible.  The other cap shows none of this, so it looks like this one is just slightly twisted within the capsule exposing the adhesive.

I couldn't think of any possible way this would create any audible issues, but was curious if anyone else's caps showed this and if anyone knew anything about it.  Probably just thinking about it too much.   ;)

Thanks.
« Last Edit: December 05, 2005, 10:19:26 PM by ford prefect »

Offline ford prefect

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 553
  • Gender: Male
Re: ck61 Metal Screen
« Reply #1 on: December 05, 2005, 10:04:30 PM »
For comparison, the other cap looks like this on all 3 sides.

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40703
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: ck61 Metal Screen
« Reply #2 on: December 05, 2005, 10:05:54 PM »
I'd send them to AKG in Tennessee and see wtf is up personally

and at that point, you're only paying for one capsule

Ive been tossing the idea around to send them my pair of ck62's, just so they can get a clean bill of heath since one has grey plastic in the base of the capsule and the other has the white and they're off about 3db of each other, no big deal, but a clean bill of health is ALWAYS nice ;)
« Last Edit: December 05, 2005, 10:08:17 PM by Bean »
Schoeps MK 4V's & MK 41V's & 250|0 KCY's ->
Naiant +60v & +48v Low Noise PFA's ->
DarkTrain Right Angle Stubby XLR's ->
Sound Devices MixPre-6 & MixPre-3

https://archive.org/details/@diskobean
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline ford prefect

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 553
  • Gender: Male
Re: ck61 Metal Screen
« Reply #3 on: December 05, 2005, 10:09:00 PM »
Bean, your 61's and 63's don't show this then?

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40703
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: ck61 Metal Screen
« Reply #4 on: December 05, 2005, 10:09:41 PM »
oh and google toolbar is the shit, I just spell-checked that last post w/ the quickness of a click ;D
Schoeps MK 4V's & MK 41V's & 250|0 KCY's ->
Naiant +60v & +48v Low Noise PFA's ->
DarkTrain Right Angle Stubby XLR's ->
Sound Devices MixPre-6 & MixPre-3

https://archive.org/details/@diskobean
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40703
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: ck61 Metal Screen
« Reply #5 on: December 05, 2005, 10:10:38 PM »
Bean, your 61's and 63's don't show this then?

nope, neither do, looks like a chicklet on the capsule :P

EDIT: I have the ck61/ck62/ck63 and NONE of them have this

did you ask the seller wtf was up?
Schoeps MK 4V's & MK 41V's & 250|0 KCY's ->
Naiant +60v & +48v Low Noise PFA's ->
DarkTrain Right Angle Stubby XLR's ->
Sound Devices MixPre-6 & MixPre-3

https://archive.org/details/@diskobean
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline ford prefect

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 553
  • Gender: Male
Re: ck61 Metal Screen
« Reply #6 on: December 05, 2005, 10:15:26 PM »
Bean, your 61's and 63's don't show this then?

nope, neither do, looks like a chicklet on the capsule :P

EDIT: I have the ck61/ck62/ck63 and NONE of them have this

did you ask the seller wtf was up?

62's don't have open sides though, so you wouldn't see it.

Haven't asked the seller, but will likely send them an email with the above pictures tomorrow to see what they say.  Actually, forget that - I'll go straight to AKG.  Seller will probably just say "It's fine, won't affect the sound", but I'd rather trust the manufacturer to make that call.

Appreciate the info, I'll let you know if they tell me anything.

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40703
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: ck61 Metal Screen
« Reply #7 on: December 05, 2005, 10:19:17 PM »
Bean, your 61's and 63's don't show this then?

nope, neither do, looks like a chicklet on the capsule :P

EDIT: I have the ck61/ck62/ck63 and NONE of them have this

did you ask the seller wtf was up?

62's don't have open sides though, so you wouldn't see it.

Haven't asked the seller, but will likely send them an email with the above pictures tomorrow to see what they say.  Actually, forget that - I'll go straight to AKG.  Seller will probably just say "It's fine, won't affect the sound", but I'd rather trust the manufacturer to make that call.

Appreciate the info, I'll let you know if they tell me anything.

oih yeah, forgot that about the ck62's :P 8) :smoking: ;D

yeah, def for the record, Id get that clean bill og health tho, there may be nothing wrong sonically, but I'd rather here that first-hand from AKG personally rather than someone selling them to you on the web, but as always YMMV

I'm not trying to freak you out bro, just what I'd DO PERSONALLY, we spend too much on this stuff not to know for sure, ya know? And I'm sure YOU WOULD sleep better at night ;)
Schoeps MK 4V's & MK 41V's & 250|0 KCY's ->
Naiant +60v & +48v Low Noise PFA's ->
DarkTrain Right Angle Stubby XLR's ->
Sound Devices MixPre-6 & MixPre-3

https://archive.org/details/@diskobean
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline ford prefect

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 553
  • Gender: Male
Re: ck61 Metal Screen
« Reply #8 on: December 05, 2005, 10:23:08 PM »
yeah, def for the record, Id get that clean bill og health tho, there may be nothing wrong sonically, but I'd rather here that first-hand from AKG personally rather than someone selling them to you on the web, but as always YMMV

I'm not trying to freak you out bro, just what I'd DO PERSONALLY, we spend too much on this stuff not to know for sure, ya know? And I'm sure YOU WOULD sleep better at night ;)

I'm with ya Bean, it's best to have the info from the source.  Hope I don't have to ship them off, but we'll see. 

Thanks again, +T for the help

Offline ford prefect

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 553
  • Gender: Male
Re: ck61 Metal Screen
« Reply #9 on: December 05, 2005, 10:29:51 PM »
I'll go straight to AKG.  Seller will probably just say "It's fine, won't affect the sound", but I'd rather trust the manufacturer to make that call.

Sent them a note.  Included a link to this thread - I'll let you know if I get any info.

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40703
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: ck61 Internal Metal Screen - Defect?
« Reply #10 on: December 05, 2005, 10:34:13 PM »
as always, set them up and listen for yourself :)
Schoeps MK 4V's & MK 41V's & 250|0 KCY's ->
Naiant +60v & +48v Low Noise PFA's ->
DarkTrain Right Angle Stubby XLR's ->
Sound Devices MixPre-6 & MixPre-3

https://archive.org/details/@diskobean
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline ford prefect

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 553
  • Gender: Male
Re: ck61 Internal Metal Screen - Defect?
« Reply #11 on: December 06, 2005, 06:07:35 AM »
as always, set them up and listen for yourself :)

Yeah - did that over the weekend and didn't hear any issues so I'm not too, too worried.

Offline ford prefect

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 553
  • Gender: Male
Re: ck61 Internal Metal Screen - Defect?
« Reply #12 on: December 06, 2005, 10:27:56 AM »
Just got a response:

Brad,
The position of the seam on the screen will not affect performance.  But, if you are concerned about the cosmetic appearance we will gladly reposition it for you.  See the letter below for address and service procedures.

Mark Zucha
Technical Services Rep.
AKG, USA

Offline OFOTD

  • Amorican
  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 6307
Re: ck61 Internal Metal Screen - Defect?
« Reply #13 on: December 06, 2005, 11:31:59 AM »
Just got a response:

Brad,
The position of the seam on the screen will not affect performance.  But, if you are concerned about the cosmetic appearance we will gladly reposition it for you.  See the letter below for address and service procedures.

Mark Zucha
Technical Services Rep.
AKG, USA

Great to hear!  Seems like another vendor willing to make things right!  You should link this thread over on the Team AKG page for other to read http://taperssection.com/index.php?topic=55047.0;all

 

RSS | Mobile
Page created in 0.056 seconds with 38 queries.
© 2002-2025 Taperssection.com
Powered by SMF