Become a Site Supporter and Never see Ads again!

Author Topic: Microtrack 24/96 1.3.3  (Read 71620 times)

0 Members and 1 Guest are viewing this topic.

Offline SClassical

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 821
  • Gender: Male
Re: Microtrack 24/96 1.3.3
« Reply #300 on: April 14, 2006, 12:20:05 PM »
I did a test last night which confirm some of our member's test.

I was using Kingston 2GB Elite CF card with my MT set at 24bit and V3 at 48kHz using external battery box and S/PDIF.

1st Track: recorded for 1 hr and I stop the recording manually.
2nd T: restarted recording manually and MT stopped REC automatically after 30mins (stating media full)
3rd T: restarted recording manually and MT stopped REC automatically after 15mins (stating media full)
4th T: restarted recording manually and MT stopped REC automatically after 7 mins (stating media full)
5th T: restarted recording manually and MT stopped REC automatically after 3 1/2 mins (stating media full)


It is consistent now that the MT will stop when the time reach half of the previous track time.

I went back to 1.2.3.
« Last Edit: April 14, 2006, 12:22:30 PM by scyue »
Mics: DPA3552 kit/DPA3521 kit/DPA SMK4081 kit/DPA SMK4060 kit/Schoeps 2X MK21, 2X MK22 and 2X MK4v and 2X Schoeps CCM2S
Mixers/preamps: Sonosax SX-M32/Sonosax SX-M2 LS/Grace Design V3/DPA MMA6000/Millennia HV-32P
Recorders: SD722/PCM-D50/MT2
Playback: Grace m903 - Sennheiser HD650 / Bowers & Wilkins Nautilus 805s

Offline BC

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2269
  • Gender: Male
  • Bongo Bongo
Re: Microtrack 24/96 1.3.3
« Reply #301 on: April 14, 2006, 05:33:36 PM »
FYI: went back to 1.2.3, pulled 4 sets of about 1 hour each, SPDIF in at 24/44.1 with no problems. For one set I had to plug in external power after I had already begun recording, did not seem to cause any problem. Recording time remaining read correctly at just over 2 hours every time I restarted a new file.

In: DPA4022>V3>Microtracker/D8

Out: Morrison ELAD>Adcom GFA555mkII>Martin Logan Aerius i

Offline udovdh

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 986
Re: Microtrack 24/96 1.3.3
« Reply #302 on: April 15, 2006, 03:29:41 AM »
Perhaps we should do a poll like, does your microtrack record without suckage (aka cutting off):
Yes
No
Mine: Yes, it works OK. (no cutting off so far)

Offline John Kelly

  • Been a while...
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 9753
  • Gender: Male
    • The Jokell
Re: Microtrack 24/96 1.3.3
« Reply #303 on: April 15, 2006, 12:09:53 PM »
Perhaps we should do a poll like, does your microtrack record without suckage (aka cutting off):
Yes
No
Mine: Yes, it works OK. (no cutting off so far)

Same here.
Sennheiser MKH8040st > SD 702
XBL/PSN/Steam ID: thejokell

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Re: Microtrack 24/96 1.3.3
« Reply #304 on: April 16, 2006, 09:06:22 AM »
I'm back at 1.2.3.

2 times out now.

1 hour and a half set at 24/48 first outing.

1.33 and 1.41 sets at 24/48 second outing.

No problems.
mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

Offline udovdh

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 986
Re: Microtrack 24/96 1.3.3
« Reply #305 on: April 17, 2006, 02:08:46 PM »
So it is an SPDIF issue (I see 24 bit...).

The past few days I did a few live recordings and all went well with the MT (bad results all my fault). In one instance I started another file and got a total recording time of 3 hours (others were 2 hours or so). No problems. (mic -> battbox -> MT 1/4" line in at min level 16/48 -> CF card)
« Last Edit: April 17, 2006, 02:11:27 PM by udovdh »

Offline LeftoverSammy

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 504
  • Gender: Male
  • MG's FUCKIN' A!!
Re: Microtrack 24/96 1.3.3
« Reply #306 on: April 17, 2006, 02:56:15 PM »
No issues running mine so far w/V1.3.3 I taped a live concert recording (Spicer Trio) on the web this weekend as a test feeding from a broadband cable access on my PC @ a rate of 750kbps, uncompressed WAV (from local radio station) feeding into my MT via TRS @ 24/48 for 1:15min w/external USB pack - no issues. Sounds pretty nice in fact....

Gonna run some SPDIF tests tonight feeding from my DA-40 to the MT and let her spin a few hrs on the 6GB micro drive. I'll pipe up if I have any issues.....
Microtech Gefell SMS2000's (M20 & M21 caps) > Luminous Audio Monarch II's or Audio Magic Silvers > MixPre 3
Grace Designs V3
Marantz PMD661
Core Sound Stealthy Cardiod mics > Battbox> Tascam DR-7

Former Nak CM300 & CM700 Vet (CP1, CP2, CP3 & CP4 caps), MX-100

Its 420.....24/7.....365!! :-)

Offline rsimms3

  • Trade Count: (10)
  • Taperssection All-Star
  • ****
  • Posts: 1489
Re: Microtrack 24/96 1.3.3
« Reply #307 on: April 19, 2006, 09:21:25 AM »
I just recently got my MT used from the Yard Sale.  I upgraded to 1.3.3 when I got it.  Last night I was able to take it out for a spin.  I recorded a 30 minute set and two 60 minute sets without issue.  I was using going 4061s > SP Dongle > MT.  I recorded 24/48 through the TRS inputs.  No problems using this setup.  I shut down between each set to conserve some battery. 
FOR SALE - Check HERE

Offline jtessier

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 142
Re: Microtrack 24/96 1.3.3
« Reply #308 on: April 19, 2006, 05:25:59 PM »
I've heard that M-Audio is getting fairly close to another firmware release (week or two I'm hoping).  Supposed to fix a lot of issues with 1.3.3. No new features that I've heard of though. Just bug fixes (which I take as a good thing, concentrate on that first, then think about features).

J.T.

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Re: Microtrack 24/96 1.3.3
« Reply #309 on: April 19, 2006, 06:26:03 PM »
I hope Everyone who has had problems with the new firmware has filed a bug report.

M-audio is dragging their feet on fixing this serious issue and only lots of reports will push them.  These bugs are gettin' old...


Bug report sent!

Bug Report Sent one week ago. 0 response. Oh well, they must know about the problem. A response telling me would be nice, though.
mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

Offline Jamos

  • Trade Count: (61)
  • Taperssection All-Star
  • ****
  • Posts: 1646
  • Gender: Male
Re: Microtrack 24/96 1.3.3
« Reply #310 on: April 20, 2006, 03:51:11 AM »
Gonna run some SPDIF tests tonight feeding from my DA-40 to the MT and let her spin a few hrs on the 6GB micro drive. I'll pipe up if I have any issues.....

I just did some similar "tests" last week...
I was transfering some analog masters:  Denon cassette deck > RCA > DA-40 (for the A>D) > S/Pdif > MT @ 24/48  Got through 3 hours of transferring w/no problems at all.  The recordings sound quite nice.

The MT is running 1.3.3 w/a 6gig Apple branded Hitachi Microdrive.  For all the problems people are having w/the MT's, I've yet to see mine have any abnormal issues...


Offline JoeKiller

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 603
  • Gender: Male
  • Duo!
    • JoeKiller.com
Re: Microtrack 24/96 1.3.3
« Reply #311 on: April 20, 2006, 09:38:47 AM »
Well I ran my MT at Disco Biscuits the other night at Starr Hill, first set went great.  I was doing 16/44.1.  The rig was a SP-C4 > mme > mt.  First set was about 1 hour 6 minutes, no problem.  Second set ran over 1 1/2 hours and the MT cut out.  I only got 1/2 the encore bah!  Oh well, my mme was still in high gain (who the hell sets those jumpers at the factory for a field unit to high gain...) which was promptly fixed after the show. 

Things I have noticed when I have problems:
Usually its after I started another file, so I try to do one file per CF card and only after a format.
Usually cuts off when I forget to set the hold button immediately.


I am running at Robert Randolph, Drive By Truckers and Man Mountain Jr. tonight.  Here's to hoping for the best.
spc4>mme>mt

Archive List

Offline silentmark

  • Shine with or without cherries ?
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2685
  • Gender: Male
  • Boat, cucumber, wire ...
Re: Microtrack 24/96 1.3.3
« Reply #312 on: April 20, 2006, 09:42:31 AM »
when you say cut out, what do you mean ? You ran out of CF space, the battery died or the MT just shut off, etc ... I have had no problems with 16/44.1 (1.2.3) ...
Dissent is the highest form of patriotism. - Howard Zinn, not Thomas Jefferson ...

Mics: Neumann AK50/AK40/AK30/AK20(1 for M/S), AKG568eb's (gathering dust)
Decks: R-44 (OCM), Fostex FR2LE (OWM), Microtacker (semi-retired), D8 (retired), D7 (retired)
Pre-amps: Apogee Minime (semi-retired), Sonosax SX-M2 (semi-retired), Oade mod SBM-1 (retired)
Cables: LC3 actives (older lemo style x2), Audio Magic Hyper Conductor interconnects

http://www.youtube.com/watch?v=J3qrWOOposQ

Offline scoper

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 177
  • Gender: Male
Re: Microtrack 24/96 1.3.3
« Reply #313 on: April 20, 2006, 09:46:39 AM »
For all the problems people are having w/the MT's, I've yet to see mine have any abnormal issues...

Ditto here, although I haven't used mine in the field that much yet. I've run many tests for battery life, using a radio as line in at 24/48 or 16/44.1, and have been getting around 4.5 hours per charge, with the files split properly every time (Kingston Elite 4GB)

I've got 2 shows next week, so hopefully my good results will continue under real life conditions. Springsteen fans rejoice - it's Taping Season!

Scott
AT853U cardioid (low sens mod)| Countryman B3 Omni (low sens mod) > CA-UGLY II > Sony PCM-M10

Former: Sony MiniDisc/JB3/MicroTrack/R-09HR

Offline JoeKiller

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 603
  • Gender: Male
  • Duo!
    • JoeKiller.com
Re: Microtrack 24/96 1.3.3
« Reply #314 on: April 20, 2006, 10:39:20 AM »
when you say cut out, what do you mean ? You ran out of CF space, the battery died or the MT just shut off, etc ... I have had no problems with 16/44.1 (1.2.3) ...

Cutting out for me means the MT is not recording any more.  It was still on and good battery.  This was 1.3.3 btw.  I wasn't out of space, it was a fresh file on a formatted 2 GB Kingston Elite.  I hit the record button and it turned back on, but all I got was the 1 seconding recording.  I was like, oh well at that point, got the first two sets, just missed the encore. 

I am really considering going to 1.2.3 for tonight.  Decisions....
spc4>mme>mt

Archive List

 

RSS | Mobile
Page created in 0.066 seconds with 38 queries.
© 2002-2024 Taperssection.com
Powered by SMF